Capacitive pressure sensors measure changes in pressure typically by the deflection of a flexible conducting membrane towards a fixed electrode. The deflection in the membrane produces a quadratic change in capacitance, which often yields higher sensitivity to changes in pressure compared to piezo-resistive pressure sensors, which measures the resistance changes proportional to the applied pressure. However, residual stresses in the membrane can provide a substantial resistance to deformation compared to the driving force created by the applied pressure, which decreases the sensitivity at low pressures and produces a nonlinear signal. If the membrane is made compliant enough to increase sensivitiy, pull-in of the membrane can occur, reducing the effective pressure range of the capacitive manometer type pressure sensor. Hence, these type of sensors are typically not used to measure very low pressure differences over several hundred Pascals. To overcome this limitation, a capacitive pressure sensor was developed that operates in a peeling mode while under applied electrostatic actuation, which counters the residual stresses. The changes in capacitance can be detected if the pressure is just enough to overcome the interfacial electrostatic pressure. This type of pressure sensor can potentially be used for very low differential pressure differences, well below 100 Pa, over ～ 1 kPa range.
展开▼
