首页> 外文会议>AIAA Aerospace Sciences Meeting >Airfoil Ice-Accretion Aerodynamics Simulation
【24h】

Airfoil Ice-Accretion Aerodynamics Simulation

机译:翼型冰 - 吸收空气动力学模拟

获取原文

摘要

NASA Glenn Research Center, ONERA and the University of Illinois are conducting a major research program whose goal is to improve our understanding of the aerodynamic scaling of ice accretions on airfoils. The program when it is completed will result in validated scaled simulation methods that produce the essential aerodynamic features of the full-scale iced-airfoil. This research will provide some of the first, high-fidelity, full-scale, iced-airfoil aerodynamic data. An initial study classified ice accretions based on their aerodynamics into four types: roughness, streamwise ice, horn ice, and spanwise-ridge ice. Subscale testing using a NACA 23012 airfoil was performed in the NASA IRT and University of Illinois wind tunnel to better understand the aerodynamics of these ice types and to test various levels of ice simulation fidelity. These studies are briefly reviewed here and have been presented in more detail in other papers. Based on these results, full-scale testing at the ONERA Fl tunnel using cast ice shapes obtained from molds taken in the IRT will provide full-scale iced airfoil data from full-scale ice accretions. Using these data as a baseline, the final step is to validate the simulation methods in scale in the Illinois wind tunnel. Computational ice accretion methods including LEWICE and ONICE have been used to guide the experiments and are briefly described and results shown. When full-scale and simulation aerodynamic results are available, these data will be used to further develop computational tools. Thus the purpose of the paper is to present an overview of the program and key results to date.
机译:NASA Glenn Research Center,Onera和伊利诺伊大学都在进行一项重大的研究计划,其目标是提高我们对翼型上的冰累积的空气动力学缩放的理解。完成后的程序将导致验证的缩放仿真方法,从而产生全级冰翼型的基本空气动力学特征。该研究将提供一些第一,高保真,满量程,僵硬的翼型空气动力学数据。初步研究基于它们的空气动力学分为四种类型:粗糙度,流动冰,喇叭冰和翼展冰。使用NACA 23012翼型的子电路测试在NASA IRT和伊利诺伊州风隧道中进行,以更好地了解这些冰类型的空气动力学,并测试各种冰仿真保真度。这些研究在此进行简要审查,并在其他论文中更详细地呈现。基于这些结果,使用IRT中采集的模具中获得的铸造冰块的Onera FL隧道中的全尺度测试将提供来自全尺寸冰冰的全垢壁炉数据。使用这些数据作为基线,最后一步是在伊利诺伊州风隧道中验证仿真方法。计算冰增冰方法包括lewice和onice,用于指导实验并简要描述并显示结果。当可用满量程和仿真空气动力学结果时,这些数据将用于进一步开发计算工具。因此,该文件的目的是概述计划和关键结果。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号