首页> 外文会议>IEEE International Symposium on the Applications of Ferroelectrics >Dielectric and piezoelectric properties of 0.15BiScO3-0.85(Pb1-3x/2Bix) (Ti0.98Mn0.02) O3 Ceramics
【24h】

Dielectric and piezoelectric properties of 0.15BiScO3-0.85(Pb1-3x/2Bix) (Ti0.98Mn0.02) O3 Ceramics

机译:0.15bisco3-0.85(Pb1-3x / 2bix)(Ti0.98mn0.02)O3陶瓷的介电和压电性能

获取原文

摘要

0.15BiScO3-0.85(Pb1-3x/2Bix)(Ti0.98Mn0.02)O3 (x=0.04~0.10), were prepared by using conventional solid phase processing. The results of X-ray diffraction (XRD) show that the ceramics have a single phase tetragonal perovskite structure. The ceramics, poled by normal poling process, have piezoelectric coefficient d33, planar electromechanical coupling factor kp and thickness electromechanical coupling factor kt of 50~60pC/N, ~11% and ~30%, respectively. A greatly high mechanical quality factor Qm of 1540 was obtained at x=0.08. The Curie temperature (Tc) is in the range of 520??????550 ?¨_C, higher than 490 ?¨_C of pure PbTiO3. The combination of good piezoelectric properties and high Tc make these ceramics suitable for elevated temperatures piezoelectric devices.
机译:通过使用常规的固相处理制备0.15bisco3-0.85(Pb1-3x / 2bix)(Ti0.98mN0.02)O 3(x = 0.04〜0.10)。 X射线衍射(XRD)的结果表明陶瓷具有单相四方钙钛矿结构。通过正常极化工艺陶瓷,具有压电系数D33,平面机电耦合因子Kp和厚度机电耦合因子Kt,分别为50〜60pc / n,〜11%和〜30%。在x = 0.08获得1540的大大机械质量因子QM。居里温度(Tc)在520 ????? 550?¨_c的范围内,高于490?纯pbtio3的¨_c。良好的压电性能和高TC的组合使得这些陶瓷适用于升高的温度压电装置。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号