EUROPEAN NETWORK OF PV OUTDOOR TESTING - STEPS TOWARDS HARMONIZED PROCEDURES

摘要

Previous results of round-robin tests among European PV outdoor test facilities showed that the measurement agreement depends on the PV module technology. P_(max) at STC matched within 2% for c-Si, 5% for CIS and CdTe based thin film technologies, and within 10% for a-Si based modules. To improve the accuracy and reliability of PV module outdoor performance characterization, harmonized procedures are formulated and implemented across PV outdoor laboratories in Europe and Israel within the Integrated Project PERFORMANCE. Common procedures for the module preparation, preconditioning, cleaning, the accuracy of the module mounting, and sensor positioning are established. It is required that the modules are loaded as closely as possible to P_(max) between IV-curve scans. The measured module and environmental parameters are listed with the required measurement accuracy and recommendations for the choice of sensors. Continuous quality control of the data is defined via data validation procedures. Parameter calculation routines are described.