首页> 外文会议>International Symposium on Advanced Ceramics >Preparation and Study of (1-m)(Mg_(0.8)Zn_(0.2))TiO_3-m{Ba_4Nd_(28/3)Ti_(18)O_54)-0.18Bi_2O_3} Microwave Dielectric Ceramics
【24h】

Preparation and Study of (1-m)(Mg_(0.8)Zn_(0.2))TiO_3-m{Ba_4Nd_(28/3)Ti_(18)O_54)-0.18Bi_2O_3} Microwave Dielectric Ceramics

机译:(1-M)的制备和研究(Mg_(0.8)Zn_(0.2))TiO_3-M {Ba_4ND_(28/3)Ti_(18)O_54)-0.18Bi_2O_3}微波介质陶瓷

获取原文
获取外文期刊封面目录资料

摘要

In this work, the microwave dielectric ceramic (l-m)(Mg_(0.8)Zn_(0.2)) TiO_3-m{Ba_4Nd_(28/3)Ti_(18)O_(54))-0.18Bi_2O_3}(m=0.1~0.4)(MZT-BNT) was studied to improve dielectric properties. The results of the dielectric properties, density, XRD and SEM show that the value of m and the sintering temperature affected the structure and properties of the ceramics. MZT-BNT composite system is a two-phase composite system. With the adding of BNT, the dielectric properties of MZT increase significantly. As m value increases, the bulk density and the dielectric constant of the composite system increase, while the quality factor reduces and the temperature coefficient of resonant frequency is close to zero. The dielectric properties of MZT-BNT sintered at 1200 °C (m = 0.3) are er= 34.03, Qt= 7177 GHz, rf = -3.39 ppm/°C, respectively.
机译:在这项工作中,微波介电陶瓷(LM)(Mg_(0.8)Zn_(0.2))TiO_3-M {Ba_4ND_(28/3)Ti_(18)O_(54)) - 0.18bi_2o_3}(m = 0.1〜0.4研究(MZT-BNT)研究以改善介电性能。介电性能,密度,XRD和SEM的结果表明,M和烧结温度的值影响了陶瓷的结构和性质。 MZT-BNT复合系统是两相复合系统。随着BNT的添加,MZT的介电性能显着增加。随着M值的增加,复合系统的堆积密度和介电常数增加,而质量因数降低并且谐振频率的温度系数接近于零。在1200℃(m = 0.3)下烧结的MZT-BNT的介电性能分别为ER = 34.03,QT = 7177GHz,RF = -3.39ppm /℃。

著录项

相似文献

  • 外文文献
  • 中文文献
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号