首页> 外文会议>International Symposium on Advanced Ceramics >Spark plasma sintering and characterization of WC-Co-cBN composite
【24h】

Spark plasma sintering and characterization of WC-Co-cBN composite

机译:WC-Co-CBN复合材料的火花血浆烧结与表征

获取原文

摘要

WC-Co-cBN composites were consolidated by SPS at 1373 to 1673 K under a moderate pressure of 100 MPa. The addition of cBN increased the starting and finishing temperature of shrinkage and decreased the relative density of WC-Co. The relative density of WC-( 10-20 vol%) cBN composites was about 97-100% at 1573 K and decreased with increasing the sintering temperature to 1673 K due to the phase transformation of cBN to hBN. The highest hardness and fracture toughness of WC-Co-20 vol% cBN composite sintered at 1573 K were 23.2 GPa and 8.0 MP m~(1/2), respectively.
机译:WC-Co-CBN复合材料在100MPa的中等压力下在1373至1673k处通过SPS巩固。加入CBN增加了收缩的起始和整理温度并降低了WC-Co的相对密度。 WC-(10-20体积%)CBN复合材料的相对密度为约97-100%,在1573k下为约97-100%,随着CBN的相变为HBN的相变,随着烧结温度的增加而降低,随着烧结温度增加至1673k。 WC-CO-20 Vol%CBN复合物的最高硬度和断裂韧性在1573k下烧结分别为23.2GPa和8.0mP m〜(1/2)。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号