Resonant Multistage Charging of Dominant Capacitances

摘要

It has been shown [2] that adiabatic switching can significantly reduce the dynamic power dissipation in an integrated circuit. Due to the overhead in the realization of adiabatic logic blocks [3] the best results are achieved when it is used only for charging dominant loads in an integrated circuit [7]. It has been demonstrated [4] that a multi stage driver is needed for minimal power dissipation. In this article a complete three stage driver including the generation of oscillating supply is described. To obtain a minimal power dissipation during synchronization the resonant frequency has to be constant. Therefore the waveforms for the logic states of the signal and the realization of a single stage differ from those presented in [4]. In the H-SPICE simulations losses of the inductor are taken into account. This allows to estimate the power reduction that is achievable in a real system.