Performance of self-tapping screws in lap-shear metal-to-metal connections

摘要

The basic design requirement for screws in light gauge steel construction is the strength of the screw in a given application (metal-to-metal, wood-to-metal, or metal-to-wood) based on the body diameter of the screw. This statement is clearlyobvious from the current AISI screw specifications for lap shear metal-to-metal connections. Recent research has shown that the performance of a screw fastener may also depend on other features of the screw including the head and thread style, and themethod of installation (stripped versus unstripped screws). The data presented in this paper address these issues for lap shear connections designed with No. 12 self-tapping screw fasteners. The tests included connections in which the fasteners wereproperly installed and connections where the fasteners were stripped. The results show that the head style and thread form may have a significant effect on the capacity of the screw fastened lap shear, even where the screws are stripped. For a given typeof screw, the results seem to indicate that any beneficial effect of a particular screw design may be diminished in connections where many fasteners are used.