首页> 外文会议>ASME/BATH symposium on fluid power and motion control >Research on Double-axis Electro-hydraulic Proportional Loading Control System with Intelligent Dual-PID for Membrane Materials
【24h】

Research on Double-axis Electro-hydraulic Proportional Loading Control System with Intelligent Dual-PID for Membrane Materials

机译:薄膜材料智能双PID双轴电液性比例加载控制系统研究

获取原文

摘要

Membrane material is one kind of special material with nonlinear feature. Its mechanical characteristic is so complicated and anisotropic that the performance is quite different between the single-axis loading and the double-axis loading. So the experimental results with the single-axis loading will usually lead to unexpected results. With the development and widely application of membrane materials, the double-axis property experiment plays an increasingly important role all around the world. Considering the situation mentioned above, a double-axis electro-hydraulic proportional loading control system with intelligent dual-PID is proposed in this paper, which controls four cylinders respectively with the help of four electro-hydraulic proportional directional valves. The cylinders provide pulling force to membrane material directly under the control of electro-hydraulic proportional directional valves. And the opening of each electro-hydraulic proportional directional valve is adjusted by intelligent dual-PID according to the pulling force as well as the position of cylinder. The simulation model of double-axis electro-hydraulic proportional loading control system with intelligent dual-PID is built and an intelligent dual-PID algorithm is also designed in this paper. The simulation and experiments show that the double-axis electro-hydraulic proportional loading control system with intelligent dual-PID can fulfill the loading precision requirement of double-axis membrane material experiment.
机译:膜材料是一种具有非线性特征的一种特殊材料。其机械特性如此复杂和各向异性,即在单轴负载和双轴负载之间的性能非常不同。因此,具有单轴负载的实验结果通常会导致意外结果。随着膜材料的发展和广泛应用,双轴物业实验在世界各地扮演着越来越重要的作用。考虑到上述情况,本文提出了一种具有智能双PID的双轴电液性比例加载控制系统,其分别在四个电液比例方向阀的帮助下分别控制四个汽缸。气缸在电液比例方向阀的控制下直接向膜材料提供拉力。并且每个电液比例定向阀的打开通过根据拉动力以及圆柱的位置来调节智能双PID。构建了具有智能双PID的双轴电液比例加载控制系统的仿真模型,并在本文中设计了智能双PID算法。仿真和实验表明,具有智能双PID的双轴电液比例加载控制系统可以满足双轴膜材料实验的装载精度要求。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号