首页> 外文会议>IEEE CPMT Symposium Japan >Development of DAF (Die Attach Film) with functional gettering agent for metal impurities
【24h】

Development of DAF (Die Attach Film) with functional gettering agent for metal impurities

机译:用金属杂质功能吸气剂的DAF(模具膜)的研制

获取原文

摘要

Gettering effect which is to trap metal ions on the dangling-bonds located far from the device area is widely known as an inhibition way of this problem. Extrinsic Gettering (EG) method that is formed during back side grinding in the wafer thinning process is one of the most significant technologies considering of reducing cost. However the chip strength has been decreased with increasing the roughness derived from crystal defect.Under these circumstances; we focused on the DAF (Die Attach Film) which is commonly used as an adhesive sheet to stack thin chips and attempted to add a functional gettering agent in this film. We selected Inorganic Ion-Exchange materials as a gettering agent and prepared some samples which have Oxidized Sb for gettering agent. From the result based on this study, the main factor determining gettering effect is an amount of substance of Ion-Exchange materials in the DAF. It's also estimated the quantity of Cu ion adsorption was about 33~50% in the whole of trapped Cu ions in the DAF. And we obtained 38 % Cu ions were adsorbed in the DAF with lOum thickness, which is about 68 % compared to the value from #2000.
机译:在远离器件区域的悬臂上捕获金属离子的吸收效果被广泛称为该问题的抑制方式。在晶片稀释过程中背面研磨期间形成的外部吸气(例如)方法是考虑降低成本的最重要技术之一。然而,随着晶体缺陷的粗糙度增加,芯片强度已经下降。在这些情况下,在这些情况下;我们专注于DAF(模具膜),该DAF(模具膜)通常用作粘合片以堆叠薄碎片,并试图在该薄膜中添加功能性吸气剂。我们选择无机离子交换材料作为吸气剂,并制备了一些对吸气剂氧化SB的样品。从基于该研究的结果,确定吸气效果的主要因素是DAF中离子交换材料的物质量。它还估计了DAF中整个被困的Cu离子的Cu离子吸附量为约33〜50%。我们获得了38%Cu离子,在DAF中吸附在DAF中,Loum厚度为约68%,与来自#2000的值相比。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号