UTILIZATION OF ASPHALT/BITUMINOUS LAYERS AND COATINGS IN RAILWAY TRACKBEDS - A COMPENDIUM OF INTERNATIONAL APPLICATIONS

摘要

During the past thirty years the use of a layer(s) of hot-mix asphalt pavement within railway track structures has steadily increased until it is becoming a common consideration or practice for specific conditions and areas in several countries throughout the world. This practice augments, and for certain designs replace, the traditional granular support materials. It is considered to be a premium trackbed design. The primary documented benefits are to provide additional support to improve load distributing capabilities of the trackbed components, decrease load-induced subgrade pressures, improve and control drainage, insure maintenance of specified track geometric properties for heavy tonnage freight lines and high-speed passenger lines, and decrease subsequent expenditures for trackbed maintenance and component replacement costs. The asphalt layer is normally used in combination with traditional granular layers to achieve various configurations.This paper presents a compendium of International Asphalt Trackbed Applications. The various factors are discussed that are considered in the design phases and subsequent performance-based tests and analyses. Illustrations include typical sectional views of the trackbed/roadbed components and thicknesses and photographs of construction and finished views for various asphalt trackbed applications in several countries. Following are brief accounts for selected significant international activities emphasizing high-speed and intercity passenger rail line applications.In the United States the use of asphalt trackbeds has steadily grown since the early 1980's. It is primarily used for maintenance (cure-all) applications in existing tracks to improve trackbed performance and for new trackbedconstruction where the projected superior performance of asphalt trackbeds can be justified economically. Typically the asphalt layer is IS cm thick and is topped with conventional ballast. This application does not deviate significantly from typical designs, except the asphalt is substituted for a portion of the granular support materials.Several other countries are actively involved with the construction of new segments or complete rail lines using asphalt (frequently termed - bituminous) trackbeds. For instance, Japan has used asphalt trackbeds on certain test sections for their high-speed rail lines since the 1960's, but since the 1970's asphalt trackbeds with ballast cover is a standard on newly constructed rail lines. The 5-cm thickness of asphalt primarily serves as a waterproofing layer and facilitates drainage. The Japanese believe that this will assist in reducing subsequent maintenance costs associated with ballast fouling from subgrade pumping. The Japanese have recently instigated a performance-rank design system. Asphalt trackbed designs are either required or are an option for the two premium trackbed performance ranks. Italy represents another country heavily involved with incorporating asphalt trackbeds in their rail lines. In the late 1970's Italy placed test sections of both asphalt and concrete on their original Rome to Florence high-speed line. From the Italian perspective the asphalt out-performed the other test sections, leading to standards requiring the use of asphalt trackbeds on all newly constructed high-speed passenger rail lines. The typical asphalt layer thickness is 12 cm.Germany has focused on using asphalt for ballastless trackbed designs. The main asphalt track in use in Germany consists of concrete ties or slab track placed on a 26 to 30-cm thick layer of asphalt. Various designs are incorporated into