首页> 外文会议>International Symposium on Multiphase Flow, Heat Mass Transfer and Energy Conversion >1-Dodecane-sulfonic-acid-sodium-salt(LAS) assisted hydrothermal synthesis of Cd_xZn_(1-x)S solid solution as efficient photocatalysts under visible light irradiation
【24h】

1-Dodecane-sulfonic-acid-sodium-salt(LAS) assisted hydrothermal synthesis of Cd_xZn_(1-x)S solid solution as efficient photocatalysts under visible light irradiation

机译:1-十二烷 - 磺酸 - 钠 - 盐(LAS)辅助CD_XZN_(1-X)固溶体的水热合成作为可见光照射下的有效光催化剂

获取原文

摘要

With anionic surfactant LAS assisted, series of zinc cadmium sulfide semiconductor photocatalysts were synthesized by hydrothermal method. These products were characterized by X-ray diffraction (XRD), UV-Vis absorption spectra (UV-Vis) and scanning electron microscopy (FESEM). The photocatalytic activities of as-prepared samples were evaluated by photocatalytic hydrogen production from water under visible-light irradiation.The best synthesis parameters are: Composition 0.9:0.1 (Cd:Zn molar ratio), Temperature 160, Hydrothermal Time 48 Hour, LAS Concentration 1.7mmol/L, the maximum visiblelight-catalytic hydrogen production rate is 161.25 μmol/h (λ>430 nm) which is higher than those of by coprecipitation method. The experiment results indicate that surfactant assisted hydrothermal method is an effective way to get highly active CdZnS solid solution photocatalyst.
机译:利用阴离子表面活性剂LAS辅助,通过水热法合成系列硫化镉半导体光催化剂。这些产品的特征在于X射线衍射(XRD),UV-Vis吸收光谱(UV-VI)和扫描电子显微镜(FeSem)。通过在可见光照射下的水中的光催化氢气产生评价AS制备样品的光催化活性。最佳合成参数是:组合物0.9:0.1(CD:Zn摩尔比),温度160,水热时间48小时,LAS浓度1.7mmol / L,最大粘虫催化氢气产率为161.25μmol/ h(λ> 430nm),高于通过共沉淀法的催化剂。实验结果表明,表面活性剂辅助水热方法是获得高活性CDZNS固溶光催化剂的有效方法。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号