An inestigation on the effect of heattreatment processes on mechanical properties of Fe-C-V steels

机译：热处理工艺对Fe-C-V钢力学性能影响的研究

获取原文

页面导航

摘要
著录项
相似文献
相关主题

摘要

In this paper,the effect of heat-treatmen processes on mechanical properties of Fe-C-V steels has been studied.It was concluded that the most suitable heat-treatment process is normalizing and tempering at 650 deg C for Fe-C-V steels to get the best mechanical properties.

机译：本文研究了热处理工艺对Fe-CV钢力学性能的影响。结论是，最合适的热处理工艺是在650℃进行正火和回火，以得到Fe-CV钢。最佳机械性能。

著录项

来源
《Asian conference on heat treatment of materials》|1998年|p.225-230|共6页
会议地点
作者
Hu Lanqing; Wei Yinghui; Wang Yunning; Wang Xudong; Huang Yuan; Liu Dongfeng;
展开▼
作者单位

展开▼
会议组织
原文格式 PDF
正文语种
中图分类金属学与金属工艺;
关键词
heat-treatment; mechanical property; Fe-C-V steel; phase transformation;

机译：热处理;机械性能Fe-C-V钢;相变;

相似文献

外文文献
中文文献
专利

1. Influence of carbides morphology on the mechanical properties for Fe-C-V alloys [J] . Kawalec Magdalena, Gorny Marcin International Journal Cast Metals Research . 2016,第1a2期

机译：碳化物形态对Fe-C-V合金力学性能的影响
2. Solidification microstructures and mechanical properties of high-vanadium Fe-C-V and Fe-C-V-Si alloys [J] . Edward Fras, Magdalena Kawalec, Hugo F. Lopez Giessereiforschung . 2010,第2期

机译：高钒Fe-C-V和Fe-C-V-Si合金的凝固组织和力学性能
3. Solidification microstructures and mechanical properties of high-vanadium Fe-C-V and Fe-C-V-Si alloys [J] . E. Fras, M. Kawalec, H.F. Lopez Materials Science and Engineering . 2009,第1a2期

机译：高钒Fe-C-V和Fe-C-V-Si合金的凝固组织和力学性能
4. An investigation on the effect of heat treatment processes on mechanical properties of Fe-C-V steels [C] . Hu Lanqing, Wei Yinghui, Wang Yunning, Asian conference on heat treatment of materials . 1998

机译：热处理工艺对Fe-C-V钢力学性能影响的研究
5. Friction Welding For Cladding Applications: Processing, Microstructure and Mechanical Properties of Inertia Friction Welds of Stainless Steel to Low Carbon Steel and Evaluation of Wrought and Welded Austenitic Stainless Steels for Cladding Applications in Acidchloride Service. [D] . Switzner, Nathan. 2017

机译：熔覆应用的摩擦焊接：不锈钢至低碳钢的惯性摩擦焊接的加工，显微组织和力学性能，以及在酸性氯化物中用于熔覆应用的锻造和焊接奥氏体不锈钢的评估。
6. Impact of Mechanical Processes as a Pre-Sulphonitriding Treatment on Tribology Properties of Selected P/M Tool Steels [O] . Daniel Toboła 2019

机译：机械工艺作为磺化前处理对所选P / M工具钢的摩擦学性能的影响
7. Mechanical properties of various concrete after high temperature exposure Mechanical property of various types of concrete after high temperature exposure is investigated. Considering compressive strength requirement for a vertical element in high rise building, concrete specimens with various design strengths of 35, 80, 100, and 150 MPa were tested. Particularly, the influence of incorporated steel fiber on fire resistance is of interest in this study. Experimental results show that the fire resistance depends on the design strength and steel fiber content. Normal strength concrete (NSC) of a design strength of 35 MPa or high performance concrete (HPC) of 80-100 MPa does not spall when exposed to 100-400 °C of temperature. However, an explosive spalling occurs at 300 °C when the HPCs contain 1 vol. of steel fiber. Ultra-high performance concrete (UHPC) of a design strength of 150 MPa and 1.5 vol. of steel fiber also shows dramatic spalling at 300 °C. The experimental results found in this study can contribute to a better understanding of the behaviors of HPC and UHPC under fire and the role of steel fiber on the fire resistance. [O] . 2017

机译：研究了高温暴露后各种混凝土高温曝光机械性能各种混凝土的机械性能。考虑到高层建筑中垂直元件的抗压强度要求，测试了35,80,100和150MPa各种设计强度的混凝土试样。特别是，在这项研究中，掺入钢纤维对耐火性的影响。实验结果表明，耐火性取决于设计强度和钢纤维含量。在暴露于100-400°C的温度时，80-100MPa的设计强度为35MPa或高性能混凝土（HPC）的正常强度混凝土（NSC）不会击落。然而，当HPC含有1体积的钢纤维的百分比时，爆炸性剥落发生在300℃。超高性能混凝土（UHPC）的设计强度为150 MPa和1.5 Vol。钢纤维的百分比也显示出300℃的剧烈剥落。本研究中发现的实验结果可以有助于更好地了解在火灾中的HPC和UHPC的行为以及钢纤维对耐火性的作用。

An inestigation on the effect of heattreatment processes on mechanical properties of Fe-C-V steels

摘要

著录项

相似文献

相关主题

期刊订阅