首页> 外文会议>IEEE Photovoltaic Specialists Conference >Optimization of PECVD process for ultra-thin tunnel SiOx film as passivation layer for silicon heterojunction solar cells
【24h】

Optimization of PECVD process for ultra-thin tunnel SiOx film as passivation layer for silicon heterojunction solar cells

机译:超薄隧道SiOx膜作为硅异质结太阳能电池钝化层的PECVD工艺的优化

获取原文

摘要

Ultra-thin silicon oxide (a-SiOx:H) films have been grown by means of plasma enhanced chemical vapor deposition (PECVD) to replace the standard hydrogenated amorphous silicon (a-Si:H) passivation layer for silicon heterojunction solar cells to reduce parasitic absorption. Additionally, silicon oxide surfaces are well known as superior substrates for the nucleation enhancement for nanocrystalline silicon doped films. Symmetrical passivation samples were fabricated with variable a-SiOx:H layers with a thickness of 10-1.5 nm and characterized after several annealing steps (25-650 °C). The best value reached so far on oriented Si wafers is: implied open circuit voltage of 686 mV and minority carrier lifetime of 1.6 ms after annealing at 300 °C. Such values were found to be reproducible even for ultra-thin a-SiOx:H layers (1.5 nm).
机译:已经通过等离子增强化学气相沉积(PECVD)生长超薄氧化硅(a-SiOx:H)膜,以取代用于硅异质结太阳能电池的标准氢化非晶硅(a-Si:H)钝化层,以减少寄生吸收。另外,众所周知,氧化硅表面是用于纳米晶硅掺杂膜的成核增强的优良衬底。用厚度为10-1.5 nm的可变a-SiOx:H层制造对称的钝化样品,并经过数个退火步骤(25-650°C)进行表征。迄今为止,在定向硅晶片上达到的最佳值是:隐含的开路电压为686 mV,在300°C退火后的少数载流子寿命为1.6 ms。发现即使对于超薄a-SiOx:H层(1.5 nm)也可以重现这样的值。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号