首页> 外文会议>IEEE International Power Electronics and Motion Control Conference >Comprehensive evaluation and design of SiC-Based high power density inverter, 70kW/liter, 50kW/kg
【24h】

Comprehensive evaluation and design of SiC-Based high power density inverter, 70kW/liter, 50kW/kg

机译:基于SiC的70kW /升,50kW / kg的高功率密度逆变器的综合评估和设计

获取原文

摘要

This paper introduces the comprehensive evaluation results of SiC-Based high power density inverter. The power density of the developed inverter is about 70kW/liter in volumetric, 50kW/kg in gravimetric. The inverter is forced air cooling 2-level voltage source inverter. In order to achieve higher power density than conventional inverters, we need to reduce losses of inverters or improve cooling performance of inverters. We developed small light-weight SiC-MOSFET power module which has good thermal conductivity. We removed SiC-SBDs from SiC-MOSFET modules. We also developed gate driver to reduce switching losses and switching time. The prototype high power density inverter is developed with the developed power modules and the proposed gate driver. The volume of the prototype inverter is about 0.5 liter and the weight is about 660g. Experimental results confirmed that the prototype inverter is able to operate up to 35kW, which means the power density of the prototype inverter is about 70kW/liter and 50kW/kg. The efficiency of the prototype inverter is more than 98%.
机译:本文介绍了基于SiC的高功率密度逆变器的综合评估结果。所开发逆变器的功率密度按体积计约为70kW /升,按重量计约为50kW / kg。逆变器为强制风冷2电平电压源逆变器。为了获得比常规逆变器更高的功率密度,我们需要减少逆变器的损耗或提高逆变器的冷却性能。我们开发了具有良好导热性的小型轻量SiC-MOSFET电源模块。我们从SiC-MOSFET模块中删除了SiC-SBD。我们还开发了栅极驱动器,以减少开关损耗和开关时间。利用已开发的电源模块和拟议的栅极驱动器开发了原型高功率密度逆变器。原型逆变器的体积约为0.5升,重量约为660g。实验结果证实,原型逆变器能够运行高达35kW,这意味着原型逆变器的功率密度约为70kW / L和50kW / kg。原型逆变器的效率超过98%。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号