首页> 外文会议>Conference on X-Ray Nanoimaging: Instruments and Methods >Hard x-ray nanoprobe by Montel KB mirrors at Taiwan Photon Source
【24h】

Hard x-ray nanoprobe by Montel KB mirrors at Taiwan Photon Source

机译:台湾Photon Source的Montel KB镜面的硬X射线纳米探针

获取原文

摘要

The hard X-ray nanoprobe at Taiwan Photon Source (TPS) makes use of the large numerical aperture obtained by nested Montel mirrors. To fully uptake the focusing power and flux, these mirrors requires the surface slope error no less than 0.05 μrad and are symmetrically placed with a 45 degrees cut for perfect surface matching. The beamline optics is designed to take the advantage of the symmetry of mirrors such that a round focal spot is accomplished. The final size of the focus spot are simulated below 40 nm at 9-15 keV. The whole facility including the beamline and the stations will be operated under vacuum to preserve photon coherence as well as to prevent the system from unnecessary environmental interference. The station equips with multimodal x-ray probes, including XRF, XAS, XEOL, projection microscope, CDI, etc. A SEM in close cooperation with laser interferometers is equipped to precisely locate the position of the sample. The beamline and the station are scheduled to be in commissioning phase in 2016.
机译:台湾光子源(TPS)的硬X射线纳米探针利用了嵌套蒙特反射镜获得的大数值孔径。为了充分吸收聚焦能力和光通量,这些反射镜要求表面倾斜度误差不小于0.05μrad,并以45度切割对称放置以实现完美的表面匹配。设计光束线光学器件以利用反射镜的对称性,从而实现圆形焦点。在9-15 keV下,在40 nm以下模拟了焦点的最终大小。包括光束线和测站在内的整个设备将在真空下运行,以保持光子相干性,并防止系统受到不必要的环境干扰。该站配备了多模态X射线探头,包括XRF,XAS,XEOL,投影显微镜,CDI等。配有与激光干涉仪紧密合作的SEM,可以精确定位样品的位置。束线和测站计划于2016年进入调试阶段。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号