首页> 外文会议>Annual International Conference of the IEEE Engineering in Medicine and Biology Society >An in vitro study of the influence of monocusp patch size on the hemodynamics for reconstructing Right Ventricular Outflow Tract in tetralogy of Fallot
【24h】

An in vitro study of the influence of monocusp patch size on the hemodynamics for reconstructing Right Ventricular Outflow Tract in tetralogy of Fallot

机译:单一起补丁尺寸对重建右侧室外流量流动血流动力学影响的体外研究

获取原文

摘要

For relief of right ventricular outflow tract obstruction in the operative treatment of tetralogy of Fallot and other complex congenital heart disease, it is often necessary to perform transannular monocusp patch to prevent right ventricular pressure overload and reduce pulmonary regurgitation. But the geometric relationship between a monocusp patch length and the size of RVOT is not well defined. Five 20 mm sized monocusp patches were tested in simulated RVOTs which sized from 18 mm to 22 mm at 1 mm interval, respectively. The hydrodynamics of the patches were assessed through a quasi-physiological artery pulsatile flow duplicator system. The transvalvular pressure difference, effective orifice area and regurgitation flow were determined. The results showed that the regurgitation fraction increased with the diameter of RVOT increased (from 6.25% at 18 mm RVOT to 26.63% at 22 mm RVOT). Implant an oversized monocusp patch in RVOT reconstruction can effectively decrease the regurgitation but increase the transvalvular pressure and may reduce the longevity of leaflet.
机译:为了缓解右心室流出道阻塞在脱椎儿动物和其他复杂先天性心脏病的手术治疗中,通常需要进行多瓣单组合贴片以防止右心室压力过载并减少肺反流性。但是蒙古普补丁长度和RVOT大小之间的几何关系并不明确。在模拟RVOT中测试5个20mm大小的单次斑块,分别在1mm间隔为1 mm至22 mm的模拟rvots中进行测试。通过准生理动脉脉动流量复制器系统评估贴剂的流体动力学。测定分瓣压差,有效孔口和流动流动。结果表明,随着22mM rvot的6.25mm rvot的6.25mm rvot为26.63%的6.25mm,从6.25mm rvot的6.25%的6.25%的6.25%增加到26.63%)增加的再脉冲率增加。植入RVOT重建中的超大单组合贴片可以有效地降低反流性,但增加了传感压力,并可能降低传单的寿命。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号