首页> 外文会议>International conference on environmental biotechnology and materials engineering;EBME 2011 >Mechanical and dynamic mechanical properties of degradable polyurethane foams with PEG/PCL mixed soft segments
【24h】

Mechanical and dynamic mechanical properties of degradable polyurethane foams with PEG/PCL mixed soft segments

机译:具有PEG / PCL混合软链段的可降解聚氨酯泡沫的力学和动态力学性能

获取原文

摘要

Polyurethane (PU) with mixed poly(ethylene glycol) /poly(e-caprolactone) (PEG/PCL) soft segments is a representatively kind of degradable polyurethane material. Polyurethane foams (PUF) with mixed PEG/PCL soft segments were synthesized by using one pot method, and their mechanical and dynamic mechanical properties were investigated. Influences of PEG/PCL weight ratio and molecular weight of soft segments on PUF's mechanical and dynamic mechanical properties were studied. The results showed that: with increasing content of PCL, PUF's tensile strength, elongation at break, stress at certain tensile/compressive strain and storage modulus increased gradually;with increasing molecular weight of soft segment, PUF's elongation at break increased, but tensile strength, stress at certain tensile/compressive strain and storage modulus all decreased accordingly;glass transition temperature (Tg) of PUF with various soft segments decreased according to the following sequence: PEG-400, PCL210N, PEG-1000 and PTMG1000;loss factor of PUF with PEG/PCL mixed soft segments was higher than that of PUF with individual PEG or PCL soft segments.
机译:具有混合的聚(乙二醇)/聚(己内酯)(PEG / PCL)软链段的聚氨酯(PU)是一种代表性的可降解聚氨酯材料。采用一锅法合成了具有混合的PEG / PCL软链段的聚氨酯泡沫(PUF),并研究了它们的力学性能和动态力学性能。研究了PEG / PCL的重量比和软链段的分子量对PUF的力学性能和动态力学性能的影响。结果表明:随着PCL含量的增加,PUF的拉伸强度,断裂伸长率,一定拉伸/压缩应变下的应力和储能模量逐渐增加;随着软链段分子量的增加,PUF的断裂伸长率增加,但拉伸强度在一定拉伸/压缩应变下的应力和储能模量都相应降低;具有各种软链段的PUF的玻璃化转变温度(Tg)依次降低:PEG-400,PCL210N,PEG-1000和PTMG1000; PUF的损耗因数PEG / PCL混合软链段比带有单个PEG或PCL软链段的PUF高。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号