首页> 外文会议>China international conference on high-performance ceramics >Synthesis and Characterization of Novel Multipods-Branched Cd-Se-S Micro-/Nano-Structures
【24h】

Synthesis and Characterization of Novel Multipods-Branched Cd-Se-S Micro-/Nano-Structures

机译:新型多样化CD-SE-S微/纳米结构的合成与表征

获取原文

摘要

Novel multipods-branched Cd-Se-S micro-/nano-structures (MNSs) were successfully prepared in a tube furnace by thermal evaporation under atmospheric pressure through using high-purity CdS and CdSe mixture powder with a molar ratio of 1:1 as evaporation source, high-purity Ar gas as carrier and protective gas, and mica wafer as substrate. Under the optimum condition, the evaporation temperature was 1100°C, Ar gas flow rate was 200 sccm, and the distance between the evaporation source and substrate was 22 cm. The microstructure examination revealed that the length of the obtained branches was up to tens of microns and the diameter of the branches was of a few microns. The composition and crystal structure analyses indicated that, the chemical composition of the multipods-branched Cd-Se-S MNSs was CdSe_(0.86)S_(0.14),which had a hexagonal structure and good crystallinity. The photoluminescence spectrum at room temperature displays an intrinsic emission peak around 620 nm. In addition, their growth might be controlled by a vapor-solid mechanism.
机译:通过使用高纯度Cds和Cdse混合物粉末在管炉中通过热蒸发在管炉中成功制备了新型多孔支化CD-SE-S微/纳米结构(MNS),通过使用高纯度Cds和Cdse混合物粉末,摩尔比为1:1蒸发源,高纯度Ar气作为载体和保护气体,以及云母晶片作为基材。在最佳条件下,蒸发温度为1100℃,Ar气体流速为200 sccm,蒸发源和衬底之间的距离为22cm。微观结构检查显示,所得分支的长度达到几十微米,分支的直径为几微米。组合物和晶体结构分析表明,多孔支化CD-SE-S MNS的化学成分是CDSE_(0.86)S_(0.14),其具有六边形结构和良好的结晶度。室温下的光致发光光谱显示在620nm周围的固有发射峰。此外,它们的生长可能由蒸汽固体机制控制。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号