首页> 外文会议>Society of Plastics Engineers Annual Technical Conference >DURABILITY OF E-GLASS FIBER REINFORCED VINYL ESTER POLYMER COMPOSITES WITH NANOCLAY IN AN ALKALINE ENVIRONMENT.
【24h】

DURABILITY OF E-GLASS FIBER REINFORCED VINYL ESTER POLYMER COMPOSITES WITH NANOCLAY IN AN ALKALINE ENVIRONMENT.

机译:碱性环境中纳米粘土的E-玻璃纤维增​​强乙烯基酯聚合物复合材料的耐久性。

获取原文

摘要

Two kinds of GFRP(glass fiber reinforced polymer)composite samples were used:the first with 2 layers of E-glass fiber fabric in a matrix of vinyl ester resin;and the second with addition of 1wt% and 2wt% nanoclay to the polymer matrix.The samples underwent aging tests with a sustained load of 890N(12.5% of tensile strength)for 3 months and the reduction in tensile strength was determined.A study was conducted to monitor the weight change of the GFRP specimens immersed in the alkaline solution under no sustained load.Another study was conducted to monitor the weight loss of glass fiber fabric immersed in the alkaline solution,also under no sustained load.Similar tests were conducted with neat resin samples and resin samples with lwt% and 2wt% nanoclay.The results of the sustained load tests show a 12-17% reduction in the tensile strength of the composite samples.However,no particular distinction was observed between the two types of GFRPs.It has been found from the absorption tests conducted on GFRP samples that the rate of alkaline solution absorption is higher in the GFRP samples without nanoclay followed by samples containing 1% and 2% nanoclay in that order.It has also been found that the dissolution rate of the glass fiber piece is linear.Tests conducted on the resin samples have shown that the weight gain was the highest in samples with 2% nanoclay followed by samples with 1 % nanoclay and then by plain polymer samples.
机译:使用了两种GFRP(玻璃纤维增​​强聚合物)复合样品:第一种用乙烯基酯树脂基质中的2层E-玻璃纤维织物;第二,并将1wt%和2wt%纳米粘土加入聚合物基质中。测定具有890N持续载荷(抗拉强度的12.5%的抗拉强度)的老化试验的样品,并测定拉伸强度的降低。进行研究以监测浸入碱性溶液中的GFRP样本的重量变化没有持续载荷。另外研究进行监测浸没在碱性溶液中的玻璃纤维织物的重量损失,也没有持续载荷。用纯树脂样品和具有LWT%和2wt%纳米粘土的树脂样品进行混合试验。结果持续载荷试验显示复合样品的拉伸强度的12-17%。然而,在吸收试验条中发现了两种GFRPS之间没有特别区别。在GFRP样品上,在没有纳米粘土的GFRP样品中碱性溶液吸收的速率较高,然后含有1%和2%纳米粘土的样品。还发现玻璃纤维片的溶出速率是线性的。在树脂样品上进行的试验表明,体重增加是在具有2%纳米粘土的样品中最高的,然后用1%纳米粘土然后通过普通聚合物样品进行样品。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号