首页> 外文会议>Gas Flow, Chemical Lasers, and High-Power Lasers pt.2 >Photo-etching of organic polymers using a laser plasma X-ray source based on a gas puff target irradiated with the PALS facility
【24h】

Photo-etching of organic polymers using a laser plasma X-ray source based on a gas puff target irradiated with the PALS facility

机译:使用激光等离子X射线源对有机聚合物进行光蚀刻,该X射线源基于用PALS装置辐照的抽气目标

获取原文
获取原文并翻译 | 示例

摘要

Experiments on direct photo-etching of organic polymers induced by high-intensity nanosecond pulses of soft X-ray radiation from a laser plasma X-ray source based on a gas puff target are presented. X-rays in the wavelength range from about 1 nm to 8 nm were produced by irradiation of the xenon/helium double-stream gas puff target with laser pulses from the Prague Asterix Laser System (PALS). The resulting X-ray pulses were used to irradiate samples from organic polymers and form microstructures. The results show relatively high efficiency of X-ray direct photo-etching that could be useful for micromachining of organic polymers.
机译:提出了对由基于等离子体靶的激光等离子体X射线源发出的高强度纳秒脉冲的软X射线辐射诱导的有机聚合物进行直接光蚀刻的实验。通过用来自布拉格Asterix激光系统(PALS)的激光脉冲辐照氙气/氦气双流气体粉扑目标,可以产生大约1 nm至8 nm波长范围内的X射线。产生的X射线脉冲用于辐照有机聚合物中的样品并形成微结构。结果表明,相对较高的X射线直接光蚀刻效率可用于有机聚合物的微加工。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号