Hydrogen-plasma etching of thin amorphous silicon layers for heterojunction interdigitated back-contact solar cells

摘要

In this study, A H_2-plasma is studied as a dry method to etch thin layers of amorphous silicon aSi:H(i) deposited on a crystalline wafer. It is found that H_2-plasma etches aSi:H(ⅰ) selectively toward silicon nitrides hard masks with an etch rate below 3nm/min. Depending on power density and temperature of the substrate during the H_2-plasma, the energy bandgap, the hydrides distribution and the void concentration of the aSi:H(ⅰ) layers are modified and the amorphous-to-crystalline transition is approached. At high temperature (＞250C) and low plasma power (＜20mW/cm~2), the dihydride (SiH_2) content increases and the bandgap widens. The etch rates stays below 0.5 nm/min. At low temperature (＜150℃) and high power (＞70mW/cm~2), the void concentration increases significantly and etch rates up to 3nm/min are recorded. These findings are supported by a theoretical model that indicates formation of Si-H-Si precursors in the layer during exposure to H_2-plasma. According to the experimental conditions, these precursors either diffuses and forms Si-Si strong bonds or are removed from the film, causing layer etching.