【24h】

New Compact MEMS-Switch Controlled Tunable DGS Coplanar Bandpass Filter

机译:新型紧凑的MEMS开关控制的可调DGS共面带通滤波器

获取原文
获取原文并翻译 | 示例

摘要

A new compact microwave defected-ground-structure (DGS) coplanar bandpass filter (BPF), which operates from 18 to 26 GHz (k-band), has been designed and simulated. The proposed structure can be redesigned for an other frequency range by changing the geometrical parameters of the CPW lines. The bandpass filter occupies an area of 2.8x1.3 mm2 and consists of two cascaded parallel-resonance circuits coupled with a series capacitor, forming a series resonator. The use of MEMS series-resistive contact switches between the additional external stub and metallic ground planes permits systematic control of the bandwidth and thus the control of two transmission zeroes in the frequency domain. Therefore, the designed bandpass filter has a wide upper bandstop and an improved symmetry of the bandpass response. The equivalent circuit extraction method has also been derived. Simulations based on the proposed circuit model are in good agreement with the electromagnetic (EM) simulation. The BPF has been designed in CPW environment on high-resistivity silicon substrate and therefore is suitable for standard MIS and MMIS.
机译:设计并仿真了一种新的紧凑型微波缺陷地面结构(DGS)共面带通滤波器(BPF),其工作频率为18至26 GHz(k波段)。可以通过更改CPW线的几何参数将提出的结构重新设计为其他频率范围。带通滤波器的面积为2.8x1.3 mm2,由两个级联的并联谐振电路和一个串联电容器组成,形成一个串联谐振器。在额外的外部短截线和金属接地层之间使用MEMS串联电阻式接触开关,可以对带宽进行系统的控制,从而可以控制频域中的两个传输零点。因此,设计的带通滤波器具有较宽的上带阻,并改善了带通响应的对称性。还推导了等效电路提取方法。基于所提出的电路模型的仿真与电磁仿真非常吻合。 BPF是在CPW环境中的高电阻率硅基板上设计的,因此适用于标准MIS和MMIS。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号