PERFORMANCE OF A LONGITUDINAL CIRCULAR-TO-SLOT GAS TURBINE EXHAUST DUCT WITH A 90 DEGREE BEND

摘要

In some gas turbine applications, it is desirable to redirect the exhaust flow through 90 degrees and mix this flow with the ambient air for the purposes of structural integrity and heat signature suppression. A method to achieve this is to transform the flow from a circular profile to a rectangular slot of high aspect ratio. The increase in wetted perimeter allows for greater mixing with the ambient air; however the shape of such a duct causes significant amounts of flow distortion and poor pressure recovery. This paper presents preliminary experimental results of the performance of such a duct and discusses the ability of a commercial CFD software package to numerically predict this performance. Significant crossflows and reversed flows were observed at the duct outlet leading to inefficient use of the outlet area, high back pressure and consequently a high loss coefficient. These trends are exacerbated with an increasing inlet swirl angle. The preliminary numerical predictions captured the general trends of the flow but could not capture the extent of the reversed flow, leading to over-prediction of the effective area ratio, E, and under-prediction of the loss coefficient, k.