【24h】

Back to Basics - The Way Forward at Pasminco Rosebery Mine

机译:回到基础-Pasminco Rosebery矿山的前进之路

获取原文
获取原文并翻译 | 示例

摘要

Significant improvements in the metallurgical performance at Pasminco Rosebery Mine have occurred over the last two years. Lead and silver recoveries have increased by more than ten per cent, lead concentrate grades are four per cent higher, zinc recoveries are up 1.5 per cent, and zinc concentrate grades have increased by two per cent. These impressive results have not occurred through the application of some new wonder reagent, but through the application of some fundamental metallurgical principals. The basic premise applied during this study was that to make an effective separation you must first achieve liberation. Therefore, the laboratory and plant studies examined the liberation characteristics within the lead circuit, and the impact of regrinding. The work demonstrated clearly that galena/sphalerite liberation was poor, and significantly impaired plant performance. Further, it was suggested that the application of lead regrinding of the lead scavenger concentrate and the lead first cleaner tailing would not only benefit lead metallurgy, but also improve sphalerite flotation. A similar approach was then applied to the zinc circuit. From these studies, solutions applying simple circuit changes utilising existing equipment were proposed and implemented. Further to the improvements in galena/sphalerite liberation, significant improvements in concentrate quality were achieved by reducing variation within the process. The implementation of changes in work practices negotiated in the Enterprise Agreement, employee contributions and specialist training also made a significant contribution to the unprecedented improvement in the lead and zinc flotation circuit performance. The results of these plant changes are discussed, along with the suggested scope for further improvement.
机译:在过去两年中,Pasminco Rosebery矿的冶金性能有了显着改善。铅和银的回收率提高了百分之十以上,铅精矿品位提高了百分之四,锌的回收率提高了1.5%,锌精矿品位提高了百分之二。这些令人印象深刻的结果不是通过应用某些新的奇效试剂而发生的,而是通过一些基本的冶金原理而发生的。在这项研究中应用的基本前提是,要进行有效的分离,您必须首先实现解放。因此,实验室和工厂研究检查了导线电路内的释放特性以及再研磨的影响。这项工作清楚地表明,方铅矿/闪锌矿的释放很差,并且严重损害了植物的性能。此外,有人建议,将铅清除剂精矿和铅先清洁剂尾矿进行铅再研磨不仅有益于铅冶金,而且还可以改善闪锌矿浮选。然后将类似的方法应用于锌电路。通过这些研究,提出并实施了利用现有设备进行简单电路更换的解决方案。除了方铅矿/闪锌矿释放的改善以外,通过减少工艺中的变化,精矿质量也得到了显着改善。实施《企业协议》中商定的工作方法变更,员工贡献和专业培训,也为铅锌浮选电路性能的空前提高做出了重要贡献。讨论了这些工厂变更的结果以及建议的进一步改进范围。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号