Noise-Aware DVFS Transition Sequence Optimization for Battery-Powered IoT Devices

摘要

Low power system-on-chips (SoCs) are now at the heart of Internet-of-Things (IoT) devices, which are well known for their bursty workloads and limited energy storage - usually in the form of tiny batteries. To ensure battery lifetime, DVFS has become an essential technique in such SoC chips. With continuously decreasing supply level, noise margins in these devices are already being squeezed. During DVFS transition, large current that accompanies the clock speed transition runs into or out of clock networks in a few clock cycles, and induces large Ldi/dt noise, thereby stressing the power delivery network (PDN). Due to the limited area and cost target, adding additional decap to mitigate such noise is usually challenging. A common approach is to gradually introduce/remove the additional clock cycles to increase or reduce the clock frequency in steps, a.k.a., clock skipping. However, such a technique may increase DVFS transition time, and still cannot guarantee minimal noise. In this work, we propose a new noise-aware DVFS sequence optimization technique by formulating a mixed 0/1 programming to resolve the problems of clock skipping sequence optimization. Moreover, the method is also extended to schedule extensive wake-up activities on different clock domains for the same purpose. The results show that we are able to achieve minimal-noise sequence within desired transition time with 53% noise reduction and save more than 15-17% power compared with the traditional approach.