A high pressure hot water acid washer is towed to a site on a trailer. A chemical tank and gasoline and diesel fuel tanks are filled. A water supply hose is connected to a water tank. A power cord is connected to a power source. A float valve controls the filling of the water tank. Water flows from the water tank through a Y-type filter to a water pump. A drain withdraws water directly from the water pump. The water pump and a compressor are driven with an engine. Pressurized water flows through a flow switch to a heat exchanger. Upon water flow, the flow switch completes a power circuit to operate a fuel pump with an electric motor. Fuel is pumped from the fuel tank and is atomized and sprayed into the heat exchanger. An ignition coil ignites the fuel. The power circuit is interrupted upon sensing a high temperature in a pressurized water delivery line from the heat exchanger. Pressure of pressurized hot water in the delivery line is controlled with a hot water pressure relief valve. Hot water flows out through a high pressure hot water hose and nozzle. The chemical tank is pressurized with air from the compressor, and chemical flows from the chemical tank. Rate of flow of chemical is controlled with a needle valve. Opening the chemical line with ball valve releases chemical to the fast hot water stream from the nozzle.
展开▼