A Joint Device for Sensor Data Acquisition System for Oil Wells

摘要

Allows the Measurement of Data concerning the viscosity and temperature, Salinity, Water percentage, the pressure and the temperature, pressure lacaneru00eda, Gas pressure and GasThe Spontaneous Potential (Voltage deoxidacion) and pH (acidity) existing in an Oilfield.The cualesprocesa and sent by wireless means to a control that can be in the area or in another Distant Place.It is composed of a three-phase separator, unsensor viscosity and Temper High percentage Water sensor, a Gas Sensor and a Standard pressure, Salinity sensor.A pH sensor and a Pressure sensor temperaturaestu00e1ndar and Standard. Application Field for several measurements of the Oil.L Well Fluid enters the Nipple Fluid environment. Enter the new Sampling produces a Bubbling that helps the separation of the gas, if this were present.If This is the case, the gas is directed by its own weight to a tube s been considered Gas and pressure placed on The Nipple out of gas,Hallainstalada whose lower part is a Valve through a floating Liquid prevents the entry of the same.As the Fluid is Left Inside the central body is allowed to settle for several hours (approx.), this is Programmable.After this time is the detection of the amount of water present. After Measuring the Fill Water starts Sensing ytemperatura viscosity.This Measurement is performed on the part where decanted Oil.In The Instant It begins Reading viscosity also began reading the pH and temperature by means of standard Sensors placed in the lower part (The caneriade Discharge) and conclExcluding this, COM Ienza reading of salinity. When you have done all the readings produced a New Cycle of replacement Fluid. All This is done automatically.Potential Measurement expontu00e1neo isdone with indication of Polarity is nte in Tube Production.Measuring the fill in the Fluid temperature is obtained at the same time it made the rest of the measurements with the aim of having a Correction factor