A useful process in which a steel material for obtaining a steel wire material reduced in the content of hard non-rollable inclusions and having enhanced drawability and enhanced fatigue characteristics is produced by adequately controlling conditions in secondary refining and production conditions in a converter. Molten iron, cold pig iron, and scrap steel are used as major raw materials to be charged into a converter, the proportions of the molten iron, cold pig iron, and scrap steel being 96-100 mass%, 4 mass% or lower, and 2 mass% or lower, respectively, based on the whole major raw materials. Blowing in the converter is conducted while the average phosphorus concentration in the whole major raw materials is regulated to 0.02 mass% or lower. After completion of the blowing in the converter, secondary refining is conducted while regulating the flow rate of a molten-iron stirring gas to 0.0005-0.004 Nm3/min per ton of the molten iron. Subsequently, continuous casting is conducted while the flow rate of argon supplied for purging into a tundish is regulated to 0.04-0.10 Nm3/min per ton of the molten iron in the tundish. ® KIPO & WIPO 2009
展开▼
机译：通过适当地控制转炉中的二次精炼条件和生产条件，来生产用于获得钢丝材料的钢材的钢材的有用方法，该钢丝材料的硬质非轧制夹杂物的含量降低并且具有增强的可拉伸性和疲劳特性。铁水，冷生铁和废钢被用作要装入转炉的主要原材料，铁水，冷生铁和废钢的比例为96-100质量％，等于或小于4质量％，以全部主要原料为基准，分别为2质量％以下。在将全部主要原料中的平均磷浓度控制在0.02质量％以下的同时进行转炉中的吹塑。转炉中的吹气完成后，进行二次精炼，同时将铁水搅拌气体的流量调节至每吨铁水0.0005-0.004 Nm3 / min。随后，进行连续铸造，同时将用于吹扫成中间包所供应的氩气的流量调节为0.04-0.10Nm3 / min /每中间包中的铁水。 ®KIPO和WIPO 2009
展开▼
