首页>外文会议>其他>European Congress and Exgibition on Powder Metallurgy(Euro PM 2003) v.1; 20031020-20031022; Valencia; ES

European Congress and Exgibition on Powder Metallurgy(Euro PM 2003) v.1; 20031020-20031022; Valencia; ES

召开年：
召开地：
出版时间：-

会议文集：-

会议论文

热门论文

全部论文

全选（0）

1.Heat Treatment of Sintered Functionally Graded Ti(C,N)-WC-Co Cermets in Nitrogen Atmospheres

机译：氮气氛中烧结功能梯度Ti（C，N）-WC-Co金属陶瓷的热处理
- 作者：I. Gugglielmi;V. Martinez;M. Alvarez;A. Ordonez;J.M. Sanchez;F. Castro
- 会议名称：《European Congress and Exgibition on Powder Metallurgy(Euro PM 2003) v.1; 20031020-20031022; Valencia; ES》 | 2003年
2.Influence of Compaction Pressures and Sintered Atmospheres on Pitting Corrosion of Post Sintered Heat Treatment PM Austenitic Stainless Steel

机译：压制压力和烧结气氛对烧结后热处理PM奥氏体不锈钢点蚀的影响
- 作者：C. Garcia;F. Martin;P. de Tiedra;L. Garcia Cambronero
- 会议名称：《European Congress and Exgibition on Powder Metallurgy(Euro PM 2003) v.1; 20031020-20031022; Valencia; ES》 | 2003年
- pitting corrosion;
- sintered;
- stainless steel;
- sintered atmosphere;
- heat treatment;
3.Influence of the Structure of Superhard Coatings (c-BN+h-BN) on Durability of Cutting Tool Edges

机译：超硬涂层（c-BN + h-BN）的结构对切削刃刃口耐久性的影响
- 作者：Maciej Kupczyk;Witold Misiak
- 会议名称：《European Congress and Exgibition on Powder Metallurgy(Euro PM 2003) v.1; 20031020-20031022; Valencia; ES》 | 2003年
4.A Personal View Of The Future Of Ferrous PM In Europe

机译：个人对欧洲黑色粉末的未来的看法
- 作者：Per Lindskog
- 会议名称：《European Congress and Exgibition on Powder Metallurgy(Euro PM 2003) v.1; 20031020-20031022; Valencia; ES》 | 2003年
5.Applications for Diamond Coated Hardmetal Tools

机译：金刚石涂层硬质合金工具的应用
- 作者：Arno Koepf;Klaus Voigt
- 会议名称：《European Congress and Exgibition on Powder Metallurgy(Euro PM 2003) v.1; 20031020-20031022; Valencia; ES》 | 2003年
6.Rolling Contact Fatigue Design Aspects of Surface Densified PM Components

机译：表面致密的PM组件的滚动接触疲劳设计方面
- 作者：L. Forden;S. Bengtsson;K. Lipp;C.M. Sonsino
- 会议名称：《European Congress and Exgibition on Powder Metallurgy(Euro PM 2003) v.1; 20031020-20031022; Valencia; ES》 | 2003年
7.Resistance to Fracture Toughness of Boron Nitride Coatings

机译：氮化硼涂层的断裂韧性
- 作者：Maciej Kupczyk
- 会议名称：《European Congress and Exgibition on Powder Metallurgy(Euro PM 2003) v.1; 20031020-20031022; Valencia; ES》 | 2003年
8.Study Of Gas Solid Interactions During Sintering Of Cr-Containing PM Steels

机译：含Cr PM钢烧结过程中气固相互作用的研究
- 作者：F. Castro;P. Ortiz
- 会议名称：《European Congress and Exgibition on Powder Metallurgy(Euro PM 2003) v.1; 20031020-20031022; Valencia; ES》 | 2003年
9.Sintering Kinetics And Thermal Analysis Of Alternative Low-Cobalt Powders For Diamond Tools

机译：金刚石工具用替代低钴粉末的烧结动力学和热分析
- 作者：Jarmo Ylikeraelae;Michael Gasik
- 会议名称：《European Congress and Exgibition on Powder Metallurgy(Euro PM 2003) v.1; 20031020-20031022; Valencia; ES》 | 2003年
10.Synthesis of Nanostructured WC Powders by Chemical Vapor Condensation Process

机译：化学气相冷凝法合成纳米WC粉
- 作者：G H Ha;B K Kim
- 会议名称：《European Congress and Exgibition on Powder Metallurgy(Euro PM 2003) v.1; 20031020-20031022; Valencia; ES》 | 2003年
- nanostuctured;
- tungsten carbide powders;
- tungsten hexacarbonyl;
- CVC;
- vapor phase reaction;
11.Surfaces Formability of PM Materials by Lapping

机译：通过研磨使PM材料的表面可成型性
- 作者：A Barylski
- 会议名称：《European Congress and Exgibition on Powder Metallurgy(Euro PM 2003) v.1; 20031020-20031022; Valencia; ES》 | 2003年
12.Synthesis Of Carbides And Nitrides Materials, Obtained From Ceramics S.H.S Starting Powders

机译：由陶瓷S.H.S起始粉末获得的碳化物和氮化物材料的合成
- 作者：J. Russias;S. Cardinal;G. Fantozzi;K. Bienvenu;G. Bienvenu;J. Fontaine
- 会议名称：《European Congress and Exgibition on Powder Metallurgy(Euro PM 2003) v.1; 20031020-20031022; Valencia; ES》 | 2003年
13.The Mechanisms of Material Separation at Steel and Concrete Material

机译：钢铁与混凝土材料分离的机理
- 作者：Denkena;B.;Toenshoff;H.K.;Becker;J.C.;Bockhorst;J.;Hillmann-Apmann;H.
- 会议名称：《European Congress and Exgibition on Powder Metallurgy(Euro PM 2003) v.1; 20031020-20031022; Valencia; ES》 | 2003年
14.The Use of a Solid C_7H_7 as a Carbon Carrier for Sintered Astaloy 85Mo Steel

机译：固态C_7H_7作为Astaloy烧结85Mo钢的碳载体的用途
- 作者：T. Pieczonka;J. Georgiev;M. Stoytchev;S.C. Mitchell;D. Teodosiev;S. Gyurov
- 会议名称：《European Congress and Exgibition on Powder Metallurgy(Euro PM 2003) v.1; 20031020-20031022; Valencia; ES》 | 2003年
- structural PM materials;
- sintered alloy steel;
- dilatometry;
- sintering process;
15.Vanadium Using As Microalloying Element In Sintered Structural Steels

机译：钒用作烧结结构钢中的微合金元素
- 作者：Magdalena Orban
- 会议名称：《European Congress and Exgibition on Powder Metallurgy(Euro PM 2003) v.1; 20031020-20031022; Valencia; ES》 | 2003年
16.Iron Based Materials With Improved Oxidation Resistance Prepared By Powder Metallurgy

机译：粉末冶金法制备的具有改善的抗氧化性的铁基材料
- 作者：Thomas Weissgaerber;Lothar Schneider;Bernd Kieback
- 会议名称：《European Congress and Exgibition on Powder Metallurgy(Euro PM 2003) v.1; 20031020-20031022; Valencia; ES》 | 2003年
17.Porosity Evaluation in High Performance Steels

机译：高性能钢的孔隙率评估
- 作者：L. Blanco;M. Campos;J.M. Torralba
- 会议名称：《European Congress and Exgibition on Powder Metallurgy(Euro PM 2003) v.1; 20031020-20031022; Valencia; ES》 | 2003年
18.Properties of Prealloyed Mo Steels Admixed with Extra-Fine Ni Powder

机译：超细镍粉预混合钼钢的性能
- 作者：T.F. Stephenson;S.T. Campbell;T. Singh
- 会议名称：《European Congress and Exgibition on Powder Metallurgy(Euro PM 2003) v.1; 20031020-20031022; Valencia; ES》 | 2003年
19.PM High Speed Steels - The Effect of Ceramic Additions and Process Methods on Fatigue Behaviour

机译：PM高速钢-陶瓷添加剂和加工方法对疲劳行为的影响
- 作者：AJ Gant;R Morrell
- 会议名称：《European Congress and Exgibition on Powder Metallurgy(Euro PM 2003) v.1; 20031020-20031022; Valencia; ES》 | 2003年
20.Plasma Carburising of a Low Alloyed Chromium and Molybdenum Steel

机译：低合金铬钼钢的等离子渗碳
- 作者：T. Marcu Puscas;Yang Yu;W. Graefen;A. Molinari
- 会议名称：《European Congress and Exgibition on Powder Metallurgy(Euro PM 2003) v.1; 20031020-20031022; Valencia; ES》 | 2003年
21.Reliable Thermally Sprayed Coatings by Optimization of Residual Stresses

机译：通过优化残余应力获得可靠的热喷涂涂层
- 作者：M. Escribano;R. Gadow
- 会议名称：《European Congress and Exgibition on Powder Metallurgy(Euro PM 2003) v.1; 20031020-20031022; Valencia; ES》 | 2003年
- thermal spraying;
- layer composites;
- residual stresses;
- microhole drilling method;
- calibration curves;
22.Application of Special Intel-facial Layers to Improve Adhesion of Superhard Coatings to Cutting Edges

机译：特殊Intel面层的应用可改善超硬涂层对切削刃的附着力
- 作者：Maciej Kupczyk
- 会议名称：《European Congress and Exgibition on Powder Metallurgy(Euro PM 2003) v.1; 20031020-20031022; Valencia; ES》 | 2003年
23.A Study Of The Repassivation Of Aisi 304 Steel Surfaces Using Electrochemical Impedance Techniques

机译：用电化学阻抗技术研究Aisi 304钢表面的钝化
- 作者：Villegas E. A.;Giosa J.A.;De Araujo C.R.
- 会议名称：《》 | 2003年
24.De-Gassing And Reduction During Sintering Of High Density PM Steels

机译：高密度永磁钢烧结时的除气和还原
- 作者：Herbert Danninger;Chen Xu
- 会议名称：《European Congress and Exgibition on Powder Metallurgy(Euro PM 2003) v.1; 20031020-20031022; Valencia; ES》 | 2003年
25.Chromium-Alloyed PM Steels with Excellent Fatigue Properties Obtained by Different Process Routes

机译：通过不同工艺路线获得的具有优异疲劳性能的铬合金PM钢
- 作者：Ola Bergman
- 会议名称：《European Congress and Exgibition on Powder Metallurgy(Euro PM 2003) v.1; 20031020-20031022; Valencia; ES》 | 2003年
26.Development Of Hcx~(~R) Stainless Steel - Based Materials For Its Application As Valve Seat Inserts In Diesel Engines

机译：Hcx〜（〜R）不锈钢基材料的开发及其在柴油机气门座圈中的应用
- 作者：N. Khattab;E. Gordo;J. M. Torralba;V. Trabadelo;I. Iturriza
- 会议名称：《European Congress and Exgibition on Powder Metallurgy(Euro PM 2003) v.1; 20031020-20031022; Valencia; ES》 | 2003年
27.Effect Of Matrix Characteristics On The Properties Of Infiltrated Steels

机译：基体特性对渗透钢性能的影响
- 作者：C. Menapace;A. Molinari;P. Costa
- 会议名称：《European Congress and Exgibition on Powder Metallurgy(Euro PM 2003) v.1; 20031020-20031022; Valencia; ES》 | 2003年
28.Dry Sliding Behaviour at elevated temperature range of Fe-Cr-Mo-C sintered steels

机译：Fe-Cr-Mo-C烧结钢在高温范围内的干滑行为
- 作者：M. Campos;I. Billa;J.M. Torralba
- 会议名称：《European Congress and Exgibition on Powder Metallurgy(Euro PM 2003) v.1; 20031020-20031022; Valencia; ES》 | 2003年
29.Ferritic Stainless Steel for High Density Applications

机译：高密度应用的铁素体不锈钢
- 作者：Ricardo Canto Leyton
- 会议名称：《European Congress and Exgibition on Powder Metallurgy(Euro PM 2003) v.1; 20031020-20031022; Valencia; ES》 | 2003年
30.Fatigue Properties of Diffusion-bonded Molybdenum Steel Powders for High Strength Applications

机译：高强度应用弥散结合钼钢粉的疲劳性能
- 作者：Guido Olschewski;Gregor Nitsch
- 会议名称：《European Congress and Exgibition on Powder Metallurgy(Euro PM 2003) v.1; 20031020-20031022; Valencia; ES》 | 2003年
31.European New Chemicals Policy: Impact on the Powder Metallurgy Industry

机译：欧洲新化学品政策：对粉末冶金行业的影响
- 作者：Peter Brewin;Mike Morley
- 会议名称：《European Congress and Exgibition on Powder Metallurgy(Euro PM 2003) v.1; 20031020-20031022; Valencia; ES》 | 2003年
32.Guiding Pads for Deep Hole Drilling Tools Made of Diamond Dispersed Carbides

机译：金刚石分散硬质合金制成的深孔钻具的导向块
- 作者：Detlef Gonia;Klaus Weinert;Michael Hagedorn
- 会议名称：《European Congress and Exgibition on Powder Metallurgy(Euro PM 2003) v.1; 20031020-20031022; Valencia; ES》 | 2003年
33.Gas/Solid Interactions In The Evolution Of Graded Microstructures In Hardmetals

机译：硬质合金梯度组织演变中的气体/固体相互作用
- 作者：A Eder;M Mauger;R Koenigshofer;W Lengauer;K Dreyer;D Kassel;H-W Daub;H van den Berg
- 会议名称：《European Congress and Exgibition on Powder Metallurgy(Euro PM 2003) v.1; 20031020-20031022; Valencia; ES》 | 2003年
34.Gas Atomisation - Blowing Hot And Cold!

机译：气体雾化-冷热吹！
- 作者：P. H. Newbatt;W.G. Hopkins
- 会议名称：《European Congress and Exgibition on Powder Metallurgy(Euro PM 2003) v.1; 20031020-20031022; Valencia; ES》 | 2003年
35.Homogeneous and Functionally Graded TiC_(0.5)N_(0.5) Based Composites Shaped by Electrophoretic Deposition

机译：通过电泳沉积成型的均相和功能梯度TiC_（0.5）N_（0.5）基复合材料
- 作者：K. Vanmeensel;G. Anne;S. Put;D. Jiang;J. Vleugels;O. Van der Biest
- 会议名称：《European Congress and Exgibition on Powder Metallurgy(Euro PM 2003) v.1; 20031020-20031022; Valencia; ES》 | 2003年
36.Impact Behaviour of High Density Low Alloyed PM Steels

机译：高密度低合金永磁钢的冲击行为
- 作者：V. Stoyanova;A. Molinari
- 会议名称：《European Congress and Exgibition on Powder Metallurgy(Euro PM 2003) v.1; 20031020-20031022; Valencia; ES》 | 2003年
37.Fracture Toughness - Fatigue Sensitivity Relationship for PM Tool Materials: Cemented Carbides and High Speed Steels

机译：断裂韧性-PM工具材料的疲劳敏感性关系：硬质合金和高速钢
- 作者：L. Llanes;Y. Torres;S. Rodriguez;A. Mateo;M. Anglada
- 会议名称：《European Congress and Exgibition on Powder Metallurgy(Euro PM 2003) v.1; 20031020-20031022; Valencia; ES》 | 2003年
38.Residual Stresses in Sintered PM Steels

机译：烧结PM钢中的残余应力
- 作者：Eldar Fetullayev;Cetin Karatas;Suleyman Saritas;Robert Causton;W. Brian James;Alan Lawley
- 会议名称：《European Congress and Exgibition on Powder Metallurgy(Euro PM 2003) v.1; 20031020-20031022; Valencia; ES》 | 2003年
39.Study Of The Relation Between Hardness, Toughness And Resistance To Wet Abrasion In Diamond Segments

机译：金刚石片的硬度，韧性与耐湿磨性之间关系的研究
- 作者：Daniele Ugues;Marco Actis Grande;Mario Rosso
- 会议名称：《European Congress and Exgibition on Powder Metallurgy(Euro PM 2003) v.1; 20031020-20031022; Valencia; ES》 | 2003年
40.Tests to Obtain Sintered Cr, Ni, Mo Alloyed Iron Base Materials, using Powder Metallurgy Processing

机译：使用粉末冶金工艺获得烧结的Cr，Ni，Mo合金铁基材料的测试
- 作者：Mariana Lucaci;Stefania Gavriliu;Elena Enescu;Paula Lungu;Adela Bara;Vasile Eugeniu
- 会议名称：《European Congress and Exgibition on Powder Metallurgy(Euro PM 2003) v.1; 20031020-20031022; Valencia; ES》 | 2003年
41.Study Of The Sintering Behaviour Of Pm Hss Under Nitrogen Atmospheres: Application To Alloy Design

机译：氮气氛下Pm Hss烧结行为的研究：在合金设计中的应用
- 作者：S. Gimenez;I. Iturriza
- 会议名称：《European Congress and Exgibition on Powder Metallurgy(Euro PM 2003) v.1; 20031020-20031022; Valencia; ES》 | 2003年
42.Technology For Production Of Nano-Materials By Fine Milling Of Used Ceramic Targets And Consolidation Of Powders In Conditions Of Intense Power Treatment

机译：强力处理条件下用过的陶瓷靶材精磨细粉固结生产纳米材料的技术
- 作者：A.F.Ilyuschenko;V.V.Savich;L.P. Pilinevich;M.V. Tumilovich;S.G.Barai;A.A.Shevchonok
- 会议名称：《European Congress and Exgibition on Powder Metallurgy(Euro PM 2003) v.1; 20031020-20031022; Valencia; ES》 | 2003年
43.Tensile Strength of Heat-Treated PM Steels

机译：热处理PM钢的拉伸强度
- 作者：G. Straffelini;C. Menapace;A. Molinari
- 会议名称：《European Congress and Exgibition on Powder Metallurgy(Euro PM 2003) v.1; 20031020-20031022; Valencia; ES》 | 2003年
44.The Effect Of Cooling Rate On The Structure And Mechanical Properties Of Sinter-Hardened Fe-(3-4)Mn-0,8C PM Steels

机译：冷却速率对烧结硬化Fe-（3-4）Mn-0,8C PM钢组织和力学性能的影响
- 作者：Maciej Sulowski;Andrzej Cias
- 会议名称：《European Congress and Exgibition on Powder Metallurgy(Euro PM 2003) v.1; 20031020-20031022; Valencia; ES》 | 2003年
45.The Hardenability of Some PM Materials: An Evaluation Through an Instrumented Jominy Test

机译：某些PM材料的可硬化性：通过仪器化的Jominy测试进行的评估
- 作者：Gian Filippo Bocchini;Andrea Baggioli;Barbara Rivolta;Giuseppe Silva
- 会议名称：《European Congress and Exgibition on Powder Metallurgy(Euro PM 2003) v.1; 20031020-20031022; Valencia; ES》 | 2003年
- hardenability;
- ideal diameter P/M steel;
- sinter hardening;
46.Thermal Stability of Nitride Phases in Fe-2Ti Sintered Alloys

机译：Fe-2Ti烧结合金中氮化物相的热稳定性
- 作者：S. Harizanova;T. Pieczonka;E. Ruseva;R. Rusev;D. Decheva;M. Stoytchev
- 会议名称：《European Congress and Exgibition on Powder Metallurgy(Euro PM 2003) v.1; 20031020-20031022; Valencia; ES》 | 2003年
- sintered steels;
- carbonitriding;
- thermal stability;
- dilatometry;
- iron nitrides;
47.Using Coated Diamonds In Diamond Impregnated Tools

机译：在金刚石浸渍工具中使用涂层金刚石
- 作者：J.A. Engels;D. Egan
- 会议名称：《European Congress and Exgibition on Powder Metallurgy(Euro PM 2003) v.1; 20031020-20031022; Valencia; ES》 | 2003年
48.Wear Progress During Green Drilling Of High Strength PM Steels

机译：高强度永磁钢生坯钻孔过程中的磨损进展
- 作者：Andreas Benner;Paul Beiss
- 会议名称：《European Congress and Exgibition on Powder Metallurgy(Euro PM 2003) v.1; 20031020-20031022; Valencia; ES》 | 2003年
49.Instrumented Impact Behaviour of 1.5Mo Alloyed Sintered Steels

机译：1.5％Mo合金烧结钢的仪器化冲击行为
- 作者：Herbert Danninger;Gerald Gelbmann;Giovanni Straffelini
- 会议名称：《European Congress and Exgibition on Powder Metallurgy(Euro PM 2003) v.1; 20031020-20031022; Valencia; ES》 | 2003年
50.Induction Hardening Of Sintered Steels: Novel Potentiality

机译：烧结钢的感应淬火：新的潜力
- 作者：Mario Rosso;Sara Guelfo;Marco Actis Grande
- 会议名称：《European Congress and Exgibition on Powder Metallurgy(Euro PM 2003) v.1; 20031020-20031022; Valencia; ES》 | 2003年
51.Influence Of Oxidation Temperature On The Behaviour Of Sintered Ferritic Stainless Steels

机译：氧化温度对烧结铁素体不锈钢性能的影响
- 作者：A. Gonzalez-Centeno;F. Velasco;A. Bautista;J. M. Torralba
- 会议名称：《European Congress and Exgibition on Powder Metallurgy(Euro PM 2003) v.1; 20031020-20031022; Valencia; ES》 | 2003年
- oxidation at high temperature;
- ferritic stainless steel;
52.Microstructure Study of Submicron WC Powder and WC-Co Alloys

机译：亚微米级WC粉末和WC-Co合金的显微组织研究
- 作者：S. Lay;R. Koesters
- 会议名称：《European Congress and Exgibition on Powder Metallurgy(Euro PM 2003) v.1; 20031020-20031022; Valencia; ES》 | 2003年
53.Influence Of Sintering Temperature On The Mechanical Properties Of Boron Alloyed Astaloy Crm Powders

机译：烧结温度对硼合金Astaloy Crm粉末力学性能的影响
- 作者：J. Kazior;T. Pieczonka;J.Ploszczak;M. Nykiel
- 会议名称：《European Congress and Exgibition on Powder Metallurgy(Euro PM 2003) v.1; 20031020-20031022; Valencia; ES》 | 2003年
54.Powder Iron-Copper Materials obtained by Liquid Infiltration: Computer Modelling and Experiment

机译：通过液体渗透获得的铁粉铜材料：计算机建模和实验
- 作者：V.M. Gorokhov;L.N. Dyachkova;A.Ph. Ilyuschenko;G.P. Ustinova;E.V. Zvonarev
- 会议名称：《European Congress and Exgibition on Powder Metallurgy(Euro PM 2003) v.1; 20031020-20031022; Valencia; ES》 | 2003年
55.Nanocrystalline (Ti,W)(CN)-based Cermets for Cutting Tool Applications

机译：用于切削工具应用的基于纳米晶（Ti，W）（CN）的金属陶瓷
- 作者：S Park;S Kang
- 会议名称：《European Congress and Exgibition on Powder Metallurgy(Euro PM 2003) v.1; 20031020-20031022; Valencia; ES》 | 2003年
56.Processing And Characterisation Of PM T42 HSS For Its Application As Valve Seat Inserts In Diesel Engines

机译：PM T42 HSS的加工与表征，用作柴油机气门座插件
- 作者：V. Trabadelo;C. Zubizarreta;S. Gimenez;I. Iturriza;N. Khattab;E. Gordo
- 会议名称：《European Congress and Exgibition on Powder Metallurgy(Euro PM 2003) v.1; 20031020-20031022; Valencia; ES》 | 2003年
57.Densification of Cemented Carbide Alloys During Sintering

机译：烧结过程中硬质合金的致密化
- 作者：Anders Petersson;John Agren
- 会议名称：《European Congress and Exgibition on Powder Metallurgy(Euro PM 2003) v.1; 20031020-20031022; Valencia; ES》 | 2003年
58.Dual Compounds 'Cemented Carbide+Steel' Produced by Diffusion Bonding

机译：扩散结合产生的双化合物“硬质合金+钢”
- 作者：H. Klaasen;J. Kuebarsepp;A. Laansoo;M. Viljus
- 会议名称：《European Congress and Exgibition on Powder Metallurgy(Euro PM 2003) v.1; 20031020-20031022; Valencia; ES》 | 2003年
59.Cutting Force and Tool Wear in Stone Machining by Sintered Diamond Tool

机译：烧结金刚石刀具在石材加工中的切削力和刀具磨损
- 作者：Turchetta S.;Carrino L.;Polini W.
- 会议名称：《European Congress and Exgibition on Powder Metallurgy(Euro PM 2003) v.1; 20031020-20031022; Valencia; ES》 | 2003年
- stone;
- wear;
- sintered diamond mill;
- cutting force wear;
60.Effect of Mean Stresses on the Endurable Amplitude of Sintered Iron and Steel

机译：平均应力对烧结钢耐久振幅的影响
- 作者：Paul Beiss
- 会议名称：《European Congress and Exgibition on Powder Metallurgy(Euro PM 2003) v.1; 20031020-20031022; Valencia; ES》 | 2003年
61.Future Requirements for Component Manufacturers

机译：零部件制造商的未来要求
- 作者：Christine M. Garramone
- 会议名称：《European Congress and Exgibition on Powder Metallurgy(Euro PM 2003) v.1; 20031020-20031022; Valencia; ES》 | 2003年