Imitation STAND DISTRIBUTION LAW

摘要

Imitation stand distribution law, consisting of a table with a rectangular hole in the center, which includes the lower part of the curved body with a receiver, which is installed inside the walls 10 with the same pitch of 1.61 cm, 4 medium consist of two parts: the upper, fixed to the two walls casing and the bottom, designed as a hinged flap height equal to the step of partitions, and 6 are three on each side are made integral with the pivotable in a vertical plane and flush with their installation for It housing wall made with an open top, wherein a hopper on wheels with inclined longitudinal walls the bottom, removable conical guide of the center, which is installed damper to move perpendicularly to the longitudinal axis of a hopper, and the lower ends of the inclined longitudinal walls of the hopper floor is set a second the sliding barrier with longitudinal displacement, the side wall of the housing parallel to each other and one of them is transparent, for example of Plexiglas, and between them, with rigidly Sh ma jumper installed around the parallel rows with a pitch of 1.61 cm along the row with the same pitch in the vertical, each underlying series with respect to the overlying shifted by half the longitudinal pitch of the overlying series of webs and the number of horizontal rows is determined by the formula N = A / T where N - number of horizontal rows of jumpers, a - step webs horizontally Tn - diameter jumper installed perpendicular to both side walls of the housing, which is closed on the left and right walls with a flap on the left side, is attached