Radioactivity neutral formula ou2083 + / - R (R = ou2083 Project Blue Ozone)

摘要

The Nuclear Decontamination procedure by ozonation, comprises the following steps: 1) operational biatu00f3mico Oxygen is subjected to a Corona effect produced by a High tension Electric current within the triatu00f3mico ozonizer Apparatus to obtain Oxygen.Ozone is generated inside a Cabinet that handles all the Power required to produce Ozone in an internal Chamber and be sent to the Mud Tank (Water Tank) by means of a Compressor (Air Pressure) through a Hose and the Bubbling Ozone causes The Inside of the Tank.2) proceeds to fill the tank of ozonated by opening the valve that allows the release of radioactive waste. This operation can be performed manually or automatically. Although the Tank ozonation has an effective Regulatory System capable of stopping the supply of liquid once full, it is advisable to close the valve before completing the load.In the case of filling of the tank is made by means of a Tanker Truck, you must first remove the CAP of the Tank; then introduces the hose of the Tank directly into the Inlet. 3) is to turn the computer on ozonizer, beginning the process of ozonation.4) after twenty minutes, proceeds to empty the Tank ozonation by opening the valve that allows the discharge of waste into the River or sea. This operation can be performed manually or automatically. Technique 2.First Step: the same way as in the previous procedure, the Ozone is generated inside a Cabinet that handles all the Power required to produce Ozone in an internal Chamber and be sent to the Mud Tank through a Compressor through a hose causes the Bubbling The Ozone inside the Tank.Second Step: Fill the tank is opened with a Water Supply Pipe Connected thereto. Fluid volume should not exceed 70% of its maximum capacity. Third STEP: remove the pipe of drinking water. Then it proceeds to the Immersion of The Radioactive Material (any contaminated Clothing, Tools, etc.) inside the tank of ozonation.This operation should be performed with Gloves on his hands. At the end of the operation, the contaminated Gloves are deposited on the inside of the Tank. Fourth STEP: Fill the tank is hermetically ozonation. Fifth STEP: turn on ozonizer. Repeat the procedure for the Decontamination of radioactive waste (Stage 3).Sixth STEP: proceeds to empty the Tank ozonation by opening the valve. Seventh STEP: Gently remove the decontaminated objects from the bottom of the Tank. This operation should be performed with a forceps. Technique 3.First Step: the Ozone is generated inside a Cabinet that handles all the Power required to produce Ozone in an internal Chamber and be sent to the building ventilation system by means of a Compressor through a hose ozonizated Air. Second Step: selection of the level of ozonation according to need.The ozonizer has a control panel operated by micro Controller enables the Power Functions of the Cabinet. From there you can select the ozonization levels ranging from Level 1 to 5. Levels 1 and 2 are recommended for the Decontamination of ZS (Environments monitored Area, nuclear facilities).ZC (Zone controlled environments, nuclear facilities) are recommended higher levels 3, 4 and 5. Technical 4. First Step: pour The Liquid Ozone (Stabilized) into the container of pressurized by Hydraulic Suction and spray. This operation requires a Funnel. Second Step: remove the Funnel.Then proceeded to install the valve Activated by screwing it to the inlet of the container is full. Third STEP: actuates the valve of the spray at a distance of 10 - 15 cm. Generously Wet contaminated area.