polyarylene sulfide resin particulate, polyarylene sulfide resin particulate mixtures, methods of producing polyarylene sulfide resin particulate and three-dimensional modeling
展开▼
机译:聚芳硫醚树脂颗粒,聚芳硫醚树脂颗粒混合物,聚芳硫醚树脂颗粒的生产方法和三维建模
展开▼
页面导航
摘要
著录项
相似文献
摘要
polyarylene sulfide resin particulate, characterized in that the average particle diameter is more than 1 µm to 100 µm, the uniformity is 4 or less, the melt viscosity measured at 300 ° c and the shear rate is 1216 sec-1 is 150 to 500 pa · s and the recrystallization temperature, defined as the peak heat generation temperature at the time of crystallization by cooling from 340 ° C to 50 ° C to 20 ° C / min using differential scanning calorimeter, is 150 to 210 ° C. A suitable polyarylene sulfide resin particulate can be efficiently supplied as a powder material to produce three-dimensional modeling by means of a three-dimensional powder sintering printer.
展开▼
机译:聚芳撑硫醚树脂颗粒,其特征在于平均粒径大于1 µm至100 µm,均匀度为4以下,在300°C下测得的熔体粘度为1216 sec-1,剪切速率为150至500 pa ·s和重结晶温度(定义为通过使用差示扫描量热仪从340°C至50°C至20°C / min进行冷却而结晶时的峰值发热温度)为150至210°C。合适的聚亚芳基可以通过三维粉末烧结打印机有效地将硫化物树脂颗粒作为粉末材料提供以产生三维模型。
展开▼