In situ encapsulation bench-scale demonstration report FY-94 (for TTP-ID 142012)

摘要

This report describes the test objectives, procedures, and results of the laboratory-scale tests of in situ waste encapsulation of buried waste using a synthetic analogue of natural cement. The products of the reaction FeSO(sub 4) (center dot) 7H(sub 2)O + Ca(OH)(sub 2) = gypsum and iron oxide/hydroxide were examined as a possible waste encapsulation material for application at the Subsurface Disposal Area at the Idaho National Engineering Laboratory. This technique for transuranic waste encapsulation is being pursued by the Buried Waste Integrated Demonstration as a possible candidate containment and stabilization method for geologic time. The data indicate that the iron waste encapsulation materials tested are appropriate choices for the intended purpose. Based on these observations and conclusions, full-scale tests are recommended to determine the performance of the iron waste isolation materials under field conditions and for extended time periods. The viscosity of the reagents indicates that jet grouting is probably an appropriate application method.