Modeling and Optimization of a Test-Cell Upgrade for MFTF-B Operating in the High Neutron Wall Loading Mode

摘要

Models of the plasma particle and power balances in a tandem mirror with a high-field test-cell insert in the central cell have been used to calculate operating points for test-cell upgrades of the MFTF-B configuration. The code results have been benchmarked against the proposal plasma parameters for the MFTF- alpha +T configuration operating in the high neutron wall loading mode. Some parametric studies have been done. Using the results from these parametrics an optimized set of operating parameters for an MFTF- alpha +T-like configuration with a test-cell which will accommodate two 1.5 m long blanket test modules has been generated. This operating point has the same test-cell neutron wall loading as the original configuration and lower input powers to other systems in the device. The neutral beam power per unit blanket module length is also somewhat reduced in the optimized case. (ERA citation 10:025063)