Hall-effect Thruster Channel Surface Properties Investigation (PREPRINT)

摘要

Surface properties of Hall-effect thruster channel walls play an important role in the performance and lifetime of the device. Physical models of near-wall effects are beginning to be incorporated into thruster simulations, and these models must account for evolution of channel surface properties due to thruster operation. Results from this study show differences in boron nitride channel surface properties from beginning-of-life and after 100's of hours of operation. Two worn thruster channels of different boron nitride grade are compared with their corresponding pristine and shadow-shielded samples. Pristine HP grade boron nitride surface roughness is 9000 +/- 700 Angstroms while the worn sample is 110,900 +/- 8900 Angstroms at the exit plane. Pristine M26 grade boron nitride surface roughness is 18400 +/1 1400 Angstroms while the worn sample is 52300 +/1 4200 Angstroms at the exit plane. Comparison of pristine and worn channel surfaces also show surface properties are dependent on axial position within the channel. For example, surface roughness increases by as much as a factor of 5.4 and surface atom fraction of carbon and metallic atoms decreases by a factor of 2.9 from anode to exit plane. Macroscopic striations at the exit plane angled 10 degrees to 30 degrees from axial are found to be related to the electron gyroradius and give rise to anisotropic surface roughness. Smoothing of ceramic grains at the microscopic level is also found.