...
首页> 外文期刊>Photochemistry and Photobiology: An International Journal >Sol-gel low-temperature synthesis of stable anatase-type TiO_2 nanoparticles under different conditions and its photocatalytic activity
【24h】

Sol-gel low-temperature synthesis of stable anatase-type TiO_2 nanoparticles under different conditions and its photocatalytic activity

机译:不同条件下溶胶-凝胶低温合成稳定的锐钛矿型TiO_2纳米粒子及其光催化活性

获取原文
获取原文并翻译 | 示例
   

获取外文期刊封面封底 >>

       

摘要

In this work, TiO_2 nanoparticles in anatase phase was prepared by sol-gel low temperature method from titanium tetra-isopropoxide (TTIP) as titanium precursor in the presence of acetic acid (AcOH). The effects of synthesis parameters such as AcOH and water ratios, sol formation time, synthesis and calcination temperature on the photocatalytic activity of TiO _2 nanoparticles were evaluated. The resulting nanoparticles were characterized by X-ray diffraction, UV-Vis reflectance spectroscopy, transmission electron microscopy and Brunauer-Emmett-Teller techniques. Photocatalytic activity of anatase TiO_2 nanoparticles determined in the removal of C. I. Acid Red 27 (AR27) under UV light irradiation. Results indicate that with increasing AcOH/TTIP molar ratio from 1 to 10, sol formation time from 1 to 3 h and synthesis temperature from 0 to 25°C, increases crystallite size of synthesized nanoparticles. It was found that optimal conditions for low temperature preparation of anatase-type TiO_2 nanoparticles with high photocatalytic activity were as follows: TTIP:AcOH:water molar ratio 1:1:200, sol formation time 1 h, synthesis temperature 0°C and calcination temperature 450°C. A comparison between the effects of the five synthesis variables on the photocatalytic activity of synthesized TiO _2 nanoparticles indicates that the acetic acid and water molar ratios have a larger effect in photocatalytic activity than other parameters.
机译:在这项工作中,在乙酸(AcOH)存在下,以四异丙醇钛(TTIP)为钛前体,通过溶胶-凝胶低温法制备了锐钛矿相的TiO_2纳米粒子。考察了AcOH和水的比例,溶胶形成时间,合成和煅烧温度等合成参数对TiO _2纳米粒子光催化活性的影响。通过X射线衍射,UV-Vis反射光谱,透射电子显微镜和Brunauer-Emmett-Teller技术表征所得的纳米颗粒。锐钛矿型TiO_2纳米粒子的光催化活性在紫外光照射下去除C. I.酸性红27(AR27)时确定。结果表明,随着AcOH / TTIP摩尔比从1增加到10,溶胶形成时间从1到3 h,合成温度从0到25°C,合成的纳米粒子的晶粒尺寸增加。发现低温制备具有高光催化活性的锐钛矿型TiO_2纳米颗粒的最佳条件如下:TTIP:AcOH:水摩尔比为1:1:200,溶胶形成时间为1 h,合成温度为0°C,煅烧温度450°C。五个合成变量对合成的TiO _2纳米颗粒的光催化活性的影响之间的比较表明,乙酸和水的摩尔比比其他参数对光催化活性的影响更大。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号