...
首页> 外文期刊>Physics in medicine and biology. >X-ray fluorescence computed tomography (XFCT) imaging of gold nanoparticle-loaded objects using 110 kVp x-rays.
【24h】

X-ray fluorescence computed tomography (XFCT) imaging of gold nanoparticle-loaded objects using 110 kVp x-rays.

机译:使用110 kVp X射线对金纳米颗粒负载物体进行X射线荧光计算机断层扫描(XFCT)成像。

获取原文
获取原文并翻译 | 示例
           

摘要

A conventional x-ray fluorescence computed tomography (XFCT) technique requires monochromatic synchrotron x-rays to simultaneously determine the spatial distribution and concentration of various elements such as metals in a sample. However, the synchrotron-based XFCT technique appears to be unsuitable for in vivo imaging under a typical laboratory setting. In this study we demonstrated, for the first time to our knowledge, the possibility of performing XFCT imaging of a small animal-sized object containing gold nanoparticles (GNPs) at relatively low concentrations using polychromatic diagnostic energy range x-rays. Specifically, we created a phantom made of polymethyl methacrylate plastic containing two cylindrical columns filled with saline solution at 1 and 2 wt% GNPs, respectively, mimicking tumors/organs within a small animal. XFCT scanning of the phantom was then performed using microfocus 110 kVp x-ray beam and cadmium telluride (CdTe) x-ray detector under a pencil beam geometry after proper filtering of the x-ray beam and collimation of the detector. The reconstructed images clearly identified the locations of the two GNP-filled columns with different contrast levels directly proportional to gold concentration levels. On the other hand, the current pencil-beam implementation of XFCT is not yet practical for routine in vivo imaging tasks with GNPs, especially in terms of scanning time. Nevertheless, with the use of multiple detectors and a limited number of projections, it may still be used to image some objects smaller than the current phantom size. The current investigation suggests several modification strategies of the current XFCT setup, such as the adoption of the quasi-monochromatic cone/fan x-ray beam and XFCT-specific spatial filters or pinhole detector collimators, in order to establish the ultimate feasibility of a bench-top XFCT system for GNP-based preclinical molecular imaging applications.
机译:传统的X射线荧光计算机断层扫描(XFCT)技术需要单色同步加速器X射线才能同时确定样品中各种元素(如金属)的空间分布和浓度。但是,基于同步加速器的XFCT技术似乎不适合在典型的实验室环境下进行体内成像。在这项研究中,我们首次证明了使用多色诊断能量范围x射线对包含相对较低浓度的金纳米颗粒(GNP)的小型动物大小物体进行XFCT成像的可能性。具体来说,我们创建了一个由聚甲基丙烯酸甲酯塑料制成的模型,其中包含两个圆柱柱,分别填充了1%和2 wt%GNP的盐水溶液,模仿了小动物体内的肿瘤/器官。然后,在对X射线束进行适当过滤和准直后,在铅笔束几何形状下使用微焦点110 kVp X射线束和碲化镉(CdTe)X射线检测器对模型进行XFCT扫描。重建的图像清楚地确定了两个GNP填充柱的位置,其对比度水平与金浓度水平成正比。另一方面,当前的XFCT笔束实现方式对于带有GNP的常规体内成像任务尚不实用,特别是在扫描时间方面。尽管如此,在使用多个检测器和有限数量的投影的情况下,仍可以使用它对小于当前幻像尺寸的某些对象进行成像。当前的研究提出了对当前XFCT设置的几种修改策略,例如采用准单色锥/扇形X射线束和XFCT专用的空间滤光片或针孔探测器准直仪,以便确定工作台的最终可行性顶XFCT系统,用于基于GNP的临床前分子成像应用。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号