An Investigation of Asphaltene Precipitation During Natural Production and the CO_2 Injection Process

摘要

Some of Iranian oil reservoirs suffer from operational problems due to asphaltene precipitation during natural depletion, so widely investigation on asphaltene precipitation is necessary for these reservoirs. In this study, a reservoir that is candidate for CO_2 gas injection process is selected to investigate asphaltene precipitation with and without CO_2 injection. In this case, asphaltene precipitation is monitored at various pressures and reservoir temperature. Then, a series of experiments are carried out to evaluate the amount of precipitated asphaltene by injection different molar concentrations (25%, 50%, and 75%) of CO_2. The results show that during primary depletion the amount of precipitated asphaltene increases with pressure reduction until bubble point pressure. Below the bubble point the process is reversed (i.e., the amount of precipitated asphaltene at bubble point pressure is maximum). The behavior of asphaltene precipitation versus pressure for different concentrations of CO_2 is similar to primary depletion. Asphaltene precipitation increases with CO_2 concentration at each pressure step. In the modeling part, solid model and Peng-Robinson equation of state are employed which show a good match with experimental results.