首页> 外文期刊>Solar Energy Materials and Solar Cells: An International Journal Devoted to Photovoltaic, Photothermal, and Photochemical Solar Energy Conversion >Influence of defects and band offsets on carrier transport mechanisms in amorphous silicon/crystalline silicon heterojunction solar cells
【24h】

Influence of defects and band offsets on carrier transport mechanisms in amorphous silicon/crystalline silicon heterojunction solar cells

机译:缺陷和能带偏移对非晶硅/晶体硅异质结太阳能电池载流子传输机制的影响

获取原文
获取原文并翻译 | 示例
           

摘要

We have investigated the carrier transport mechanisms in undoped a-Si:H/p-type c-Si heterojunctions with and without a mu c-Si buffer layer, as well as their effects on the photovoltaic properties of the junction. The conduction behavior of the junction is strongly affected by the defect state distribution and band offset at the hetero-interface. The recombination process involving the interface states on the thin film silicon (a-Si:H/mu c-Si) side dominates at low forward bias (V < 0.3 V), whereas multistep tunneling capture emission (MTCE) dominates in the higher bias region (0.3 < V < 0.55 V) until the conduction becomes space charge limited (V > 0.55 V). The MTCE process seems to be more closely related to the bulk defects in the thin film silicon than the interface states. In addition, the position of a trapping level, where the tunneling process occurs, seems to be determined by the hole energy at the edge of the c-Si and the trap distribution in the thin film silicon. Despite the domination of MTCE in the indicated voltage range, the reduced band offset at the interface increases current levels by the enhanced diffusion and/or emission processes. The insertion of a 200 Angstrom thick mu c-Si buffer layer between the a-Si:H (700 Angstrom)/c-Si increases the solar cell efficiency to 10%, without an antireflective coating, by improving both the carrier transport and the red response of the cell. (C) 2000 Elsevier Science B.V. All rights reserved. [References: 17]
机译:我们已经研究了具有和不具有μc-Si缓冲层的未掺杂a-Si:H / p型c-Si异质结中的载流子传输机制,以及它们对结的光伏性质的影响。结的导电行为在很大程度上受到缺陷状态分布和异质界面带隙的影响。涉及薄膜硅(a-Si:H / mu c-Si)侧界面状态的复合过程在低正向偏置(V <0.3 V)下占主导地位,而多步隧穿捕获发射(MTCE)在较高偏置下占主导地位区域(0.3 0.55 V)。与界面状态相比,MTCE工艺似乎与薄膜硅中的体缺陷更紧密相关。另外,发生隧穿过程的俘获能级的位置似乎由c-Si边缘的空穴能和薄膜硅中的俘获分布决定。尽管在指定的电压范围内MTCE占主导地位,但由于增强的扩散和/或发射过程,界面处的带隙减小导致电流电平增加。在a-Si:H(700埃)/ c-Si之间插入200埃厚的mu c-Si缓冲层,可通过改善载流子传输和载流子传输,将太阳能电池效率提高至10%,而无需使用抗反射涂层。单元格的红色响应。 (C)2000 Elsevier Science B.V.保留所有权利。 [参考:17]

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号