首页> 外文期刊>CERAMICS INTERNATIONAL >Preparation of titanium nitride ultrafine powders by sol-gel and microwave carbothermal reduction nitridation methods
【24h】

Preparation of titanium nitride ultrafine powders by sol-gel and microwave carbothermal reduction nitridation methods

机译:溶胶-凝胶和微波碳热还原氮化法制备氮化钛超细粉

获取原文
获取原文并翻译 | 示例
           

摘要

Titanium nitride ultrafine powders were prepared from tetrabutyl titanate and sucrose by sol-gel and microwave carbothermal reduction methods. The influences of reaction temperature, molar ratio of Ti to C, addition of crystal seeds and amount of NH4F on the synthesis of titanium nitride were studied. The results show that excess amount of carbon, addition of crystal seeds and NH_4F plays a positive effect on the preparation of TiN at low temperature. The inceptive formation temperature of TiN ultrafine powders is about 800 deg C, and pure TiN can be prepared at 1000 deg C. Field emission-scanning electron microscopy (FE-SEM) was used to get the micrograph of the TiN powder, it shows that the size of the powders synthesized at 1000 deg C is about 0.1-0.5 mu m.
机译:钛酸四丁酯和蔗糖通过溶胶-凝胶法和微波碳热还原法制得氮化钛超细粉。研究了反应温度,Ti / C摩尔比,晶种添加和NH4F含量对氮化钛合成的影响。结果表明,过量的碳,晶种和NH_4F的加入对低温制备TiN具有积极的作用。 TiN超细粉的感生形成温度约为800℃,可以在1000℃制备纯TiN。用场发射扫描电子显微镜(FE-SEM)得到TiN粉的显微照片,表明在1000℃下合成的粉末的尺寸为约0.1-0.5μm。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号