首页> 外文期刊>Natural hazards and earth system sciences >Combined fluvial and pluvial urban flood hazard analysis: concept development and application to Can Tho city, Mekong Delta, Vietnam
【24h】

Combined fluvial and pluvial urban flood hazard analysis: concept development and application to Can Tho city, Mekong Delta, Vietnam

机译:河道与小雨相结合的城市洪水灾害分析:概念的发展与在越南湄公河三角洲芹T市的应用

获取原文
获取原文并翻译 | 示例
           

摘要

Many urban areas experience both fluvial and pluvial floods, because locations next to rivers are preferred settlement areas and the predominantly sealed urban surface prevents infiltration and facilitates surface inundation. The latter problem is enhanced in cities with insufficient or non-existent sewer systems. While there are a number of approaches to analyse either a fluvial or pluvial flood hazard, studies of a combined fluvial and pluvial flood hazard are hardly available. Thus this study aims to analyse a fluvial and a pluvial flood hazard individually, but also to develop a method for the analysis of a combined pluvial and fluvial flood hazard. This combined fluvial-pluvial flood hazard analysis is performed taking Can Tho city, the largest city in the Vietnamese part of the Mekong Delta, as an example. In this tropical environment the annual monsoon triggered floods of the Mekong River, which can coincide with heavy local convective precipitation events, causing both fluvial and pluvial flooding at the same time. The fluvial flood hazard was estimated with a copula-based bivariate extreme value statistic for the gauge Kratie at the upper boundary of the Mekong Delta and a large-scale hydrodynamic model of the Mekong Delta. This provided the boundaries for 2-dimensional hydrodynamic inundation simulation for Can Tho city. The pluvial hazard was estimated by a peak-over-threshold frequency estimation based on local rain gauge data and a stochastic rainstorm generator. Inundation for all flood scenarios was simulated by a 2-dimensional hydrodynamic model implemented on a Graphics Processing Unit (GPU) for time-efficient flood propagation modelling. The combined fluvial-pluvial flood scenarios were derived by adding rainstorms to the fluvial flood events during the highest fluvial water levels. The probabilities of occurrence of the combined events were determined assuming independence of the two flood types and taking the seasonality and probability of coincidence into account. All hazards - fluvial, pluvial and combined - were accompanied by an uncertainty estimation taking into account the natural variability of the flood events. This resulted in probabilistic flood hazard maps showing the maximum inundation depths for a selected set of probabilities of occurrence, with maps showing the expectation (median) and the uncertainty by percentile maps. The results are critically discussed and their usage in flood risk management are outlined.
机译:许多城市地区都经历了河流洪水和洪灾洪水,因为靠近河流的位置是首选的定居地区,并且主要是密封的城市表面防止了渗入并促进了表面淹没。在下水道系统不足或不存在的城市,后一个问题更加严重。尽管有很多方法可以分析河道洪灾或暴雨洪灾的危害,但几乎没有关于河道洪灾和洪灾洪灾的综合研究。因此,本研究旨在分别分析河流和洪水泛滥灾害,同时也开发了一种分析河流和洪水泛滥灾害的方法。以湄公河三角洲越南部分最大的城市芹T市为例,进行了河滩相洪灾害综合分析。在这种热带环境下,一年一度的季风引发了湄公河的洪水,这可能与当地的强对流降水事件相吻合,同时造成了河流洪水和暴雨洪水。利用湄公河三角洲上边界的Kratie量表的基于copula的二元极值统计量和湄公河三角洲的大规模水动力模型,估算了河流洪水的危害。这为芹T市的二维水动力淹没模拟提供了边界。通过基于当地雨量计数据和随机暴雨发生器的阈值峰值频率以上的估计来估计暴雨危害。通过在图形处理单元(GPU)上实现的二维水动力模型对所有洪水情景的淹没进行了仿真,以实现高效的洪水传播建模。通过在最高河道水位期间向河道洪水事件中增加暴雨来推导出河道-河流洪灾的组合情境。假定两种洪水类型的独立性并考虑季节和巧合的可能性,确定组合事件的发生概率。考虑到洪水事件的自然变异性,所有危害(河流,暴雨和混合灾害)都伴随着不确定性估计。这导致概率性洪水灾害图显示了一组选定的发生概率的最大淹没深度,而这些图则通过百分位图显示了预期(中位数)和不确定性。对结果进行了严格的讨论,并概述了其在洪水风险管理中的用途。

著录项

相似文献

  • 外文文献
  • 中文文献
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号