...
首页> 外文期刊>Nano Energy >Chemically modified titanium oxide nanostructures for dye-sensitized solar cells
【24h】

Chemically modified titanium oxide nanostructures for dye-sensitized solar cells

机译:用于染料敏化太阳能电池的化学改性的氧化钛纳米结构

获取原文
获取原文并翻译 | 示例

摘要

We report a simple and yet powerful method to improve the performance of TiO_2-based N3 dye-sensitized solar cells (DSSCs) by hydrogen-treatment of TiO_2 nanostructures as photoelectrodes. The solar conversion efficiency of DSSC based on TiO_2 rutile nanowires was increased from 0.28% to 0.45% after the nanowire electrode was annealed at 350°C in a pure hydrogen atmosphere. The enhanced conversion efficiency was attributed to improved charge transport as a result of increased electron density by three orders of magnitude upon hydrogenation. While the conversion efficiency was improved by 61%, the overall efficiency was still low, possibly due to the limited loading of N3 dye molecules on TiO_2 nanowires. To improve dye loading, a similar study of hydrogen-treated Degussa P25 nanoparticles (H-P25) electrodes was conducted in which the conversion efficiency was enhanced by 13% compared to untreated P25. The DSSC based on H-P25 achieved a very high photocurrent, 20.81mA/cm~2, and solar conversion efficiency, 9.30%, under 1sun illumination. The donor density of H-P25 was found to increase by 1.5 times compared to P25, consistent with the relatively small enhancement in overall conversion efficiency. To gain new physical insight into the dye sensitization process, ultrafast transient absorption (TA) spectroscopy was applied to probe the excited dynamics of N3 dye in ethanol solution as well as adsorbed on H-P25, P25 and ZrO_2. The TA spectrum of H-P25 and P25 was dominated by N~(3+) generated following electron injection, which occurs in <150fs. In addition, time dependent density function theory (TDDFT) calculations of N3 and N~(3+) provided further insight into the origin of TA spectra as well as the related dynamic processes. The results demonstrate that hydrogenation of TiO2 electrodes can be a low cost and effective way to enhance performance of DSSC by rationally introducing bandgap states that enhanced the donor density and thereby charge transport.
机译:我们报告了一种简单而强大的方法,通过对作为光电极的TiO_2纳米结构进行氢处理来提高基于TiO_2的N3染料敏化太阳能电池(DSSC)的性能。将纳米线电极在纯氢气气氛中于350°C退火后,基于TiO_2金红石型纳米线的DSSC的太阳能转化效率从0.28%提高到0.45%。氢化后,电子密度增加了三个数量级,从而提高了转换效率,这归因于电荷传输的改善。尽管转化效率提高了61%,但总效率仍然很低,这可能是由于TiO_2纳米线上N3染料分子的负载有限所致。为了提高染料负载量,对氢处理的Degussa P25纳米颗粒(H-P25)电极进行了类似的研究,与未处理的P25相比,其转换效率提高了13%。在1个阳光照射下,基于H-P25的DSSC可获得非常高的光电流20.81mA / cm〜2,并且太阳能转换效率为9.30%。发现H-P25的供体密度是P-25的1.5倍,这与总体转化效率的提高相对较小相符。为了获得对染料敏化过程的新的物理见解,应用超快速瞬态吸收(TA)光谱来探测N3染料在乙醇溶液中以及吸附在H-P25,P25和ZrO_2上的激发动力学。 H-P25和P25的TA光谱以电子注入后产生的N〜(3+)为主,发生时间小于150fs。此外,N3和N〜(3+)的时变密度函数理论(TDDFT)计算为TA光谱的起源以及相关的动力学过程提供了进一步的见解。结果表明,通过合理引入能提高供体密度从而带动电荷迁移的带隙态,TiO2电极的氢化可以是一种低成本且有效的提高DSSC性能的方法。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号