A new apparatus for non-destructive evaluation of green-state powder metal compacts using the electrical-resistivity method

摘要

This paper presents a new apparatus developed for non-destructive evaluation (NDE) of green-state powder metal compacts. A green-state compact is an intermediate step in the powder metallurgy (PM) manufacturing process, which is produced when a metal powder-lubricant mixture is compacted in a press. This compact is subsequently sintered in a furnace to produce the finished product. Non-destructive material testing is most cost effective in the green state because early flaw detection permits early intervention in the manufacturing cycle and thus avoids scrapping large numbers of parts. Unfortunately, traditional NDE methods have largely been unsuccessful when applied to green-state PM compacts. A new instrumentation approach has been developed, whereby direct currents are injected into the green-state compact and an array of spring-loaded needle contacts records the voltage distributions on the surface. The voltage distribution is processed to identify potentially dangerous surface and sub-surface flaws. This paper presents the custom-designed hardware and software developed for current injection, voltage acquisition, pre-amplification and flaw detection. In addition, the testing algorithm and measurement results are discussed. The success of flaw detection using the apparatus is established by using controlled samples, which are PM compacts with dielectric inclusions inserted.