...
首页> 外文期刊>Micron: The international research and review journal for microscopy >Visualization of micromorphology of leaf epicuticular waxes of the rubber tree Ficus elastica by electron microscopy
【24h】

Visualization of micromorphology of leaf epicuticular waxes of the rubber tree Ficus elastica by electron microscopy

机译:用电子显微镜观察橡胶树榕树叶片表皮蜡的微观形态

获取原文
获取原文并翻译 | 示例

摘要

Ultrastructural aspects of leaf epicuticular waxes were investigated in Ficus elastica by scanning and transmission electron microscopy. Glossy leaves of the rubber tree were collected and subjected to different regimes of specimen preparation for surface observations. F. elastica leaves were hypostomatic and stomata were surrounded with a cuticular thickening that formed a rim. The most prominent epicuticular wax structures of F. elastica leaves included granules and platelets. Without fixation and metal coating, epicuticular wax structures could be discerned on the leaf surface by low-vacuum (ca. 7 Pa) scanning electron microscopy. In terms of delineation and retention of the structures, the combination of vapor fixation by glutaraldehyde and osmium tetroxide with subsequent gold coating provided the most satisfactory results, as evidenced by high resolution and sharp protrusions of epicuticular waxes. However, erosion of epicuticular wax edges was noted in the immersion fixed leaves, showing less elongated platelets, less distinct wax edges, and granule cracking. These results suggest that the vapor fixation procedure for demonstrating three-dimensional epicuticular wax structures would facilitate characterization of diverse types of waxes. Instances were noted where epicuticular waxes grew over neighboring epidermal ridges and occluded stomata. In cross sections, epicuticular waxes were observed above the cuticle proper and ranged approximately from 100 nm to 500 nm in thickness. The native leaf epicuticular waxes had many layers of different electron density that were oriented parallel to each other and parallel or perpendicular to the cuticle surface, implying strata of crystal growth. Such retention of native epicuticular wax structures could be achieved through the use of acrylic resin treated with less harsh dehydrants and mild heat polymerization, alleviating wax extraction during specimen preparations.
机译:通过扫描和透射电子显微镜研究了榕树中叶片表皮蜡的超微结构方面。收集橡胶树的有光泽的叶子,并对其进行不同的样品制备方案以进行表面观察。 F. elastica叶片为低气孔,气孔被表皮增厚包围形成边缘。 F.弹性叶最突出的表皮蜡结构包括颗粒和血小板。没有固定和金属涂层,可以通过低真空(约7 Pa)扫描电子显微镜在叶片表面辨别表皮蜡结构。就结构的描绘和保留而言,戊二醛和四氧化的蒸汽固定与随后的金涂层的结合提供了最令人满意的结果,表皮蜡的高分辨率和尖锐突起证明了这一点。然而,在浸泡固定的叶片中发现表皮蜡边缘受到侵蚀,显示出较少的细长血小板,较少的明显蜡边缘和颗粒破裂。这些结果表明,用于演示三维表皮蜡结构的蒸气固定过程将有助于表征各种类型的蜡。注意到一些实例,其中表皮蜡生长在邻近的表皮脊和闭塞的气孔上。在横截面中,在表皮适当上方观察到表皮蜡,其厚度范围为约100nm至500nm。天然叶片表皮蜡具有许多不同电子密度的层,这些层彼此平行且平行或垂直于角质层表面取向,这意味着晶体生长的地层。这种天然表皮蜡结构的保留可以通过使用经过较少苛刻脱水剂处理和温和的热聚合处理的丙烯酸树脂来实现,从而减轻了样品制备过程中蜡的提取。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号