首页> 外文期刊>Cancer biotherapy and radiopharmaceuticals >A pilot study on the feasibility of real-time calculation of three-dimensional dose distribution for 153Sm-EDTMP radionuclide therapy based on the voxel S-values.
【24h】

A pilot study on the feasibility of real-time calculation of three-dimensional dose distribution for 153Sm-EDTMP radionuclide therapy based on the voxel S-values.

机译:基于体素S值实时计算153Sm-EDTMP放射性核素治疗的三维剂量分布的可行性的初步研究。

获取原文
获取原文并翻译 | 示例
           

摘要

OBJECTIVE: Using (153)Sm-EDTMP therapy for bone metastases from nasopharyngeal cancer (NPC), we attempted a real-time three-dimensional (3D) dose calculation based on the S-value for voxels. The 3D radionuclide uptake data on SPECT images were factored into the precalculations by the Monte Carlo (MC) method. METHODS: For the nuclide (153)Sm, the S-value for voxels of size 3.45 x 3.45 x 3.45 mm(3) in a soft tissue phantom was precalculated on a self-developed program built from the MC program EGS4. Based on the SPECT/CT image of the patient, the 3D dose rate distributions were calculated with the S-value method and compared with the direct MC calculation results. The total volume of the whole calculation region and the bone were chosen as the regions of interest (ROIs); additionally, the dose rate volume histograms (DVHs) for the ROIs were also calculated. RESULTS: The iso-dose was administered based on the scan images obtained at 6 hours following injection with the nuclide. In the calculation region, the maximum dose rate was 5.98 x 10(-5) and 6.26 x 10(-5) mGy/(MBq S) for S-value and direct MC calculations, respectively. Once the dose rate was normalized to the maximum dose rate point, the iso-dose curves for both methods of calculation were similar in most regions and reasonably matched the functional image as well. The DVHs of the ROIs indicated that the dose rate distributions were nonuniform, that is, approximately 30% of the bone-ROI volume received 10% of the maximum dose rate; however, only 3.8% volume received 50% of the maximum dose rate. CONCLUSIONS: Using (153)Sm-EDTMP therapy for bone metastases from NPC, we attempted to supplement the current dosimetry work at the image-level by a pragmatic and real-time dosimetry calculation based on S-value and functional imaging. More accurate dose calculations for patients undergoing radionuclide therapy will depend on the development of higher image resolution in nuclear medicine and warrant further studies to optimize the pharmacokinetics model.
机译:目的:使用(153)Sm-EDTMP治疗鼻咽癌(NPC)骨转移,我们尝试基于S值对体素进行实时三维(3D)剂量计算。通过蒙特卡洛(MC)方法将SPECT图像上的3D放射性核素摄取数据纳入预计算。方法:对于核素(153)Sm,在一个由MC程序EGS4构建的自行开发的程序中,预先计算了软组织体模中尺寸为3.45 x 3.45 x 3.45 mm(3)的体素的S值。基于患者的SPECT / CT图像,使用S值方法计算3D剂量率分布,并将其与直接MC计算结果进行比较。选择整个计算区域和骨骼的总体积作为目标区域(ROI);此外,还计算了ROI的剂量率体积直方图(DVH)。结果:基于注射核素后6小时获得的扫描图像给予等剂量。在计算区域中,对于S值和直接MC计算,最大剂量率分别为5.98 x 10(-5)和6.26 x 10(-5)mGy /(MBq S)。一旦将剂量率归一化到最大剂量率点,两种计算方法的等剂量曲线在大多数区域都是相似的,并且也与功能图像合理匹配。 ROI的DVH表示剂量率分布不均匀,即大约30%的骨ROI体积接收最大剂量率的10%;但是,只有3.8%的体积接受最大剂量率的50%。结论:使用(153)Sm-EDTMP治疗NPC的骨转移,我们尝试通过基于S值和功能成像的实用实时剂量计算来补充当前在图像级别的剂量测定工作。对于接受放射性核素治疗的患者而言,更准确的剂量计算将取决于核医学中更高图像分辨率的发展,并有待进一步研究以优化药代动力学模型。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号