首页> 外文期刊>Medical Physics >An approach to using conventional brachytherapy software for clinical treatment planning of complex, Monte Carlo-based brachytherapy dose distributions.
【24h】

An approach to using conventional brachytherapy software for clinical treatment planning of complex, Monte Carlo-based brachytherapy dose distributions.

机译:一种使用常规近距离放射治疗软件进行基于蒙特卡洛的复杂近距离放射治疗剂量分布的临床治疗计划的方法。

获取原文
获取原文并翻译 | 示例
           

摘要

Certain brachytherapy dose distributions, such as those for LDR prostate implants, are readily modeled by treatment planning systems (TPS) that use the superposition principle of individual seed dose distributions to calculate the total dose distribution. However, dose distributions for brachytherapy treatments using high-Z shields or having significant material heterogeneities are not currently well modeled using conventional TPS. The purpose of this study is to establish a new treatment planning technique (Tufts technique) that could be applied in some clinical situations where the conventional approach is not acceptable and dose distributions present cylindrical symmetry. Dose distributions from complex brachytherapy source configurations determined with Monte Carlo methods were used as input data. These source distributions included the 2 and 3 cm diameter Valencia skin applicators from Nucletron, 4-8 cm diameter AccuBoost peripheral breast brachytherapy applicators from Advanced Radiation Therapy, and a 16 mm COMS-based eye plaque using 103Pd, 125I, and 131Cs seeds. Radial dose functions and 2D anisotropy functions were obtained by positioning the coordinate system origin along the dose distribution cylindrical axis of symmetry. Origin:tissue distance and active length were chosen to minimize TPS interpolation errors. Dosimetry parameters were entered into the PINNACLE TPS, and dose distributions were subsequently calculated and compared to the original Monte Carlo-derived dose distributions. The new planning technique was able to reproduce brachytherapy dose distributions for all three applicator types, producing dosimetric agreement typically within 2% when compared with Monte Carlo-derived dose distributions. Agreement between Monte Carlo-derived and planned dose distributions improved as the spatial resolution of the fitted dosimetry parameters improved. For agreement within 5% throughout the clinical volume, spatial resolution of dosimetry parameter data < or = 0.1 cm was required, and the virtual brachytherapy source data set included over 5000 data points. On the other hand, the lack of consideration for applicator heterogeneity effect caused conventional dose overestimates exceeding an order of magnitude in regions of clinical interest. This approach is rationalized by the improved dose estimates. In conclusion, a new technique was developed to incorporate complex Monte Carlo-based brachytherapy dose distributions into conventional TPS. These results are generalizable to other brachytherapy source types and other TPS.
机译:某些近距离放射治疗剂量分布,例如用于LDR前列腺植入物的近距离放射治疗剂量分布,很容易通过治疗计划系统(TPS)进行建模,该系统使用单个种子剂量分布的叠加原理来计算总剂量分布。但是,目前使用传统的TPS无法很好地模拟使用高Z罩或具有明显材料异质性的近距离放射治疗的剂量分布。这项研究的目的是建立一种新的治疗计划技术(塔夫茨技术),该技术可用于某些常规方法不可接受且剂量分布呈圆柱对称的临床情况。使用Monte Carlo方法确定的来自复杂近距离放射治疗源配置的剂量分布用作输入数据。这些来源分布包括Nucletron的直径2厘米和3厘米的Valencia皮肤涂抹器,Advanced Radiation Therapy的4-8厘米直径的AccuBoost周边乳房近距离放射治疗器以及使用103Pd,125I和131Cs种子的基于COMS的16毫米眼斑。通过沿剂量分布圆柱对称轴放置坐标系原点,可以获得径向剂量函数和2D各向异性函数。选择原点:组织距离和有效长度,以最小化TPS插值误差。将剂量参数输入到PINNACLE TPS中,然后计算剂量分布并将其与原始的蒙特卡洛衍生剂量分布进行比较。新的计划技术能够再现所有三种施药器的近距离放射治疗剂量分布,与蒙特卡洛衍生的剂量分布相比,产生的剂量学一致性通常在2%以内。随着拟合剂量学参数的空间分辨率提高,蒙特卡洛衍生剂量和计划剂量分布之间的一致性得到改善。为了在整个临床量中达到5%以内的一致性,需要剂量参数参数数据的空间分辨率≤0.1 cm,并且虚拟近距离放射治疗源数据集包括5000多个数据点。另一方面,由于缺乏对涂药器异质性影响的考虑,导致常规剂量在临床关注区域被高估了一个数量级。通过改进剂量估计可以使这种方法合理化。总之,开发了一种新技术,将基于蒙特卡洛的复杂近距离放射治疗剂量分布纳入常规TPS。这些结果可推广到其他近距离放射治疗源类型和其他TPS。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号