...
首页> 外文期刊>Medical Physics >Calculation and validation of the use of effective attenuation coefficient for attenuation correction in In-111 SPECT.
【24h】

Calculation and validation of the use of effective attenuation coefficient for attenuation correction in In-111 SPECT.

机译:In-111 SPECT中使用有效衰减系数进行衰减校正的计算和验证。

获取原文
获取原文并翻译 | 示例
   

获取外文期刊封面封底 >>

       

摘要

Nuclear medicine tracers using 111In as a radiolabel are increasing in their use, especially in the domain of oncologic imaging. In these applications, it often is critical to have the capability of quantifying radionuclide uptake and being able to relate it to the biological properties of the tumor. However, images from single photon emission computed tomography (SPECT) can be degraded by photon attenuation, photon scattering, and collimator blurring; without compensation for these effects, image quality can be degraded, and accurate and precise quantification is impossible. Although attenuation correction for SPECT is becoming more common, most implementations can only model single energy radionuclides such as 99mTc and 123I. Thus, attenuation correction for 111In is challenging because it emits two photons (171 and 245 keV) at nearly equal rates (90.2% and 94% emission probabilities). In this paper, we present a method of calculating a single "effective" attenuation coefficient for the dual-energy emissions of 111In, and that can be used to correct for photon attenuation in radionuclide images acquired with this radionuclide. Using this methodology, we can derive an effective linear attenuation coefficient Micro(eff) and an effective photon energy E(eff) based on the emission probabilities and linear attenuation coefficients of the 111In photons. This approach allows us to treat the emissions from 111In as a single photon with an effective energy of 210 keV. We obtained emission projection data from a tank filled with a uniform solution of 111In. The projection data were reconstructed using an iterative maximum-likelihood algorithm with no attenuation correction, and with attenuation correction assuming photon energies of 171, 245, and 210 keV (the derived E(eff)). The reconstructed tomographic images demonstrate that the use of no attenuation correction, or correction assuming photon energies of 171 or 245 keV introduces inaccuracies into the reconstructed radioactivity distribution when compared against the effective energy method. In summary, this work provides both a theoretical framework and experimental methodology of attenuation correction for the dual-energy emissions from 111In. Although these results are specific to 111In, the foundation could easily be extended to other multiple-energy isotopes.
机译:使用111In作为放射性标记的核医学示踪剂的用途正在增加,尤其是在肿瘤成像领域。在这些应用中,具有定量放射性核素摄取能力并将其与肿瘤的生物学特性联系起来的能力通常至关重要。但是,单光子发射计算机断层扫描(SPECT)产生的图像可能会因光子衰减,光子散射和准直仪模糊而退化。如果不对这些影响进行补偿,则图像质量可能会下降,并且无法进行精确的定量。尽管SPECT的衰减校正变得越来越普遍,但是大多数实现只能模拟单个能量放射性核素,例如99mTc和123I。因此,111In的衰减校正具有挑战性,因为它以几乎相等的速率(90.2%和94%的发射概率)发射两个光子(171和245 keV)。在本文中,我们提出了一种为111In的双重能量发射计算单个“有效”衰减系数的方法,该方法可用于校正使用此放射性核素获取的放射性核素图像中的光子衰减。使用这种方法,我们可以基于111 In光子的发射概率和线性衰减系数,得出有效的线性衰减系数Micro(eff)和有效的光子能量E(eff)。这种方法使我们可以将111In的发射视为具有210 keV有效能量的单个光子。我们从装有111In均匀溶液的储罐中获得了排放预测数据。投影数据是使用迭代最大似然算法重建的,该算法没有衰减校正,并且衰减校正假设光子能量为171、245和210 keV(导出的E(eff))。重建的断层图像显示,与有效能量方法相比,不使用衰减校正或假设光子能量为171或245 keV的校正会给重建的放射性分布带来不准确性。总而言之,这项工作为111 In的双能发射提供了衰减校正的理论框架和实验方法。尽管这些结果是特定于111In的,但该基础可以轻松扩展到其他多能同位素。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号