...
首页> 外文期刊>Medical dosimetry: official journal of the American Association of Medical Dosimetrists >A comprehensive clinical 3-dimensional dosimetric analysis of forward planned IMRT and conventional wedge planned techniques for intact breast radiotherapy.
【24h】

A comprehensive clinical 3-dimensional dosimetric analysis of forward planned IMRT and conventional wedge planned techniques for intact breast radiotherapy.

机译:完整的乳房放疗的前瞻性IMRT和常规楔形计划技术的全面3维剂量学分析。

获取原文
获取原文并翻译 | 示例
           

摘要

A forward planned intensity modulated technique was initiated for intact breasts radiotherapy (FPIMRT). Forty-three patients were selected to compare dose distributions achieved by FPIMRT to dose distributions produced by conventional wedge techniques (CW). For the simulation process, the treatment field margins were clinically defined by a physician, and a set of fiducial reference markers was placed on the patient. A computed tomography (CT) scan was then performed and the images were transferred to a 3-dimensional (3D) treatment planning system (TPS). The breast tissue was then contoured to allow for a quantitative dose volume analysis. The treatment plan was initially generated with conventional tangential beam arrangements and open fields. Multiple multileaf collimator (MLC) shaped segments were created for each tangential beam in an effort to produce dose homogeneity throughout the breast. 6-MV photon beams were used for treatment unless acceptable dose homogeneity could not be achieved due to large breast size. In this case, the beam energies of selected segments were modified to 15-MV. Once the FPIMRT plan was created, additional plans were generated using the same beam geometry and 2 tangential open fields with CW techniques and 15 degrees wedges (15DW), 30 degrees wedges (30DW), 45 degrees wedges (45 DW), and 60 degrees wedges (60DW). The dose distributions generated by the CW plans were then compared to the FPIMRT plan. This process was repeated for each patient, and the patient group was divided into 3 categories based on breast volume (small, medium, and large). Both point dose relationships, which compared global hot spot (GHS) magnitude and location and dose volume relationships, which compared breast volume coverage of the 105% and 110% isodose lines (IDL) relative to the prescribed dose (PD), were explored. For the patient group in our study, FPIMRT produced the smallest average GHS and the most evenly distributed location of GHS for all breast size categories when compared to all CW techniques. FPIMRT also produced the smallest average breast volume receiving greater than 105% of the PD (V(a105)) for the small- and medium-size breast patients and the smallest average breast volume receiving greater than 110% of the PD (V(a110)) for all breast size categories when compared to all CW techniques.
机译:开始进行前瞻性计划的强度调制技术,以进行完整的乳房放射治疗(FPIMRT)。选择了43例患者,以比较FPIMRT实现的剂量分布与常规楔形技术(CW)产生的剂量分布。对于模拟过程,医师应在临床上定义治疗视野的边界,并在患者身上放置一组基准参考标记。然后执行计算机断层扫描(CT)扫描,并将图像传输到3维(3D)治疗计划系统(TPS)。然后勾勒出乳房组织的轮廓,以进行定量的剂量体积分析。该治疗计划最初是使用常规切线束布置和开阔场生成的。为每个切线束创建了多个多叶准直器(MLC)形状的段,以在整个乳房中产生剂量均匀性。除非由于大乳房而无法达到可接受的剂量均匀性,否则将使用6-MV光子束进行治疗。在这种情况下,所选段的束能量被修改为15-MV。一旦创建了FPIMRT计划,便使用CW技术和15度楔形(15DW),30度楔形(30DW),45度楔形(45 DW)和60度,使用相同的光束几何形状和2个切向开放场来生成其他计划楔形(60DW)。然后将CW计划生成的剂量分布与FPIMRT计划进行比较。对每位患者重复此过程,并且根据乳房体积(小,中和大)将患者组分为3类。探索了两个点剂量关系,它们比较了全球热点(GHS)的大小,位置和剂量体积的关系,后者比较了相对于规定剂量(PD)的105%和110%等剂量线(IDL)的乳房体积覆盖率。对于我们研究中的患者组,与所有CW技术相比,FPIMRT在所有乳房尺寸类别中产生的GHS最小,平均GHS分布最均匀。 FPIMRT还为中小型乳腺患者提供了最小的平均乳房体积,其接受的PD大于105%(V(a105)),最小的平均乳房体积则接受了大于PD的110%(V(a110))。 ))与所有CW技术相比都适用。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号