Experimental investigation on the propagation of fatigue cracks emanating from sharp notches

摘要

The effect of notch geometry on the propagation of fatigue cracks emanating from sharp V-shaped notches is investigated by means of an experimental campaign performed on Al-7075-T651 specimens carrying notches with opening angles of 45 degrees, 90 degrees, and 135 degrees. The samples were tested using a servohydraulic machine under different loading directions and at several loading levels. The crack deflection induced by the variation in loading direction was determined my measuring the kinking angle and by studying the crack propagation plane through fractographic analysis. A linear elastic fracture mechanics approach was adopted for the analysis of experimental results. Stress intensity factors were calculated using an appropriate weight function set up for studying inclined edge cracks emanating from sharp V-notches. The influence of K-II on the crack propagation was discussed on the basis of theoretical and semi empirical models.